We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI CLTM20, contact FAMAGA, the world's principle company of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are outlined in the quality of outcomes and special attention to each buyer. We esteem everyone, who engaged with us - thus, our regular purchasers bring in the most beneficial purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Bhutan, San Marino, Dominica, Bahamas, Denmark, Yemen, Philippines, Cameroon, Ghana, Libya, Palestine, Qatar, Grenada, Antigua and Barbuda, Turkey, Belize, Equatorial Guinea, Saudi Arabia, Mali, Albania, Sudan, Paraguay, Eritrea, Brazil, Djibouti, India, Liberia, Chile, Macedonia, Malaysia, Norway, Zambia, Mozambique, Uganda, Croatia, Laos, Rwanda, Senegal, Morocco, Thailand, Kyrgyzstan, Kiribati, Bulgaria, Sierra Leone, Zimbabwe, Kazakhstan, North Korea. A well-elaborated logistics chains and a partnership network assist us to dispatch our goods anywhere in the globe promptly without disreputing product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, contact us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Accessory | ||
Side Mounting | Side Mounting, Dowel Hole | Side Mounting | Side Mounting, Dowel Hole | ||
CLTB | CLPK | Steel for General Structure | Black Oxide | Hex Socket Head Cap Screw | Hex Socket Head Set Screw Dowel Pin |
CLTM | CLPM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | Hex Socket Head Cap Screw (Stainless Steel) Dowel Pin | |
CLTBM | - | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw | - |
CLTAM | - | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | ||
CLTS | - | EN 1.4301 Equiv. | - |
DH7 | Accessory: Dowel Pin |
20 | MSTM6-20 |
25 | MSTM8-20 |
30 | |
35 | MSTM10-30 |
40 | |
50 |
Part Number |
CLTB35 CLPM30 |
Part Number | A | B | L | T | F | G | K | h | H | E | d | d1 | Z | MA | W | PH7 | Included Screw | Unit Price | ||||||||||
Side Mounting | Side Mounting, Dowel Hole | |||||||||||||||||||||||||||
Type | DH7 | Tolerance | CLTB | CLTM | CLTBM | CLTAM | CLTS | CLPK | CLPM | |||||||||||||||||||
Side Mounting CLTB CLTM CLTBM CLTAM CLTS | Side Mounting, Dowel Holes CLPK CLPM | 10 | +0.015 0 | 40 | 35 | 32 | 10 | 30 | 18 | 4.4 | 15 | 10.5 | 20 | 5 | 8 | 4.5 | M4 | 2 | - | - | M4-15, 2 pcs. | - | - | |||||
12 | +0.018 0 | 44 | 34 | 5.5 | 14 | 11.5 | 22 | 5.5 | 9 | 5.5 | M5 | M5-15, 2 pcs. | - | - | ||||||||||||||
15 | 50 | 40 | 38 | 12 | 38 | 20 | 6.6 | 18 | 12.5 | 25 | 6.6 | 11 | 6.5 | M6 | M6-15, 2 pcs. | - | - | |||||||||||
16 | M6-15, 2 pcs. | - | - | - | ||||||||||||||||||||||||
20 | +0.021 0 | 65 | 45 | 45 | 12 | 50 | 25 | 6.6 | 22 | 15 | 30 | 6.6 | 11 | 6.5 | M6 | 2 | 6 | +0.012 0 | M6-20, 2 pcs. | |||||||||
25 | 80 | 60 | 53 | 60 | 36 | 9 | 27 | 18 | 35 | 8 | +0.015 0 | M6-25, 2 pcs. | ||||||||||||||||
30 | 90 | 60 | 15 | 70 | 30 | 21 | 45 | 9 | 14 | 9 | M8 | M8-35, 2 pcs. | ||||||||||||||||
35 | +0.025 0 | 105 | 80 | 68 | 15 | 80 | 40 | 11 | 35 | 24 | 50 | 9 | 14 | 9 | M8 | 3 | 10 | +0.015 0 | M8-40, 2 pcs. | - | ||||||||
40 | 115 | 76 | 90 | 38 | 27 | 60 | 11 | 17.5 | 11 | M10 | M10-45, 2 pcs. | - | ||||||||||||||||
50 | 135 | 100 | 87 | 18 | 105 | 50 | 14 | 43 | 33 | 70 | M10-50, 2 pcs. | - | ||||||||||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. CLTS is applicable up to D=30, and CLPK and CLPM are available from D=20 and up. D=16 of CLTBM is not available. |