We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQ101R
Description
[NAAMS] Locating Pin With Cross Hole APQ Small Head
Stock availability:
On request
If you are questing MISUMI APQ101R, get in touch with FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each consumer. We respect everyone, who conspired with us - so, our regular customers accept the most favorable purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such buyers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Dominica, Poland, Honduras, Guinea, Comoros, South Korea, Portugal, Uganda, Greece, Belarus, Jordan, Papua New Guinea, Samoa, Algeria, Liberia, Benin, South Sudan, The Bahamas, Ukraine, Costa Rica, Iran, Romania, Mongolia, El Salvador, Nicaragua, Qatar, Jamaica, Bangladesh, Swaziland, Nepal, Guatemala, Sudan, Senegal, Cyprus, Hungary, East Timor, Andorra, Cape Verde, Estonia, Panama, Morocco, China, United States, Finland, Zimbabwe. A advanced logistics series and a partnership network assist us to deliver our goods anywhere in the world immediately without compromising product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | NAAMS Standard | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQRS | A Configurable | P -Plain T -TiN | ||
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head Callout | A Lead Length Callout | Retractable | |||
APQ | 08 | 4 | R |
Part Number | ||||||||
Type | Coating | Tip Shape | D Head Call Out | A | ||||
APQRS | T | A | 08 | - | A42 |
Type | D Head Callout | A Lead Length | Retractable | Coating (Optional) | B Rad | C Rad | |||||||
10 mm | 15 mm | 25 mm | 35 mm | 45 mm | 55 mm | 65 mm | 75 mm | ||||||
APQ (Hole h6) | 08 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | R- Retractable | None-Plain T- TiN | 1.0 | 24.0 |
10 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 30.0 | |||
13 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 39.0 |
Type | Coating | Tip Shape | D Head Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQRS (Hole-h6) | P-Plain T- TiN | A B C | 08 | 5 ~ 100 | 2.0 | 24.0 | 12.0 | D/2 |
10 | 30.0 | 15.0 | D/2 | |||||
13 | 39.0 | 19.5 | D/2 |