We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ALBTFB25-A[85-120/1]-M10-D8-DA8
Description
[NAAMS] L-Block T-Shape 4 Holes
Stock availability:
On request
If you are looking for MISUMI ALBTFB25-A[85-120/1]-M10-D8-DA8, connect FAMAGA, the world's primary retailer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each customer. We value everyone, who joined with us - so, our regular consumers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, El Salvador, Seychelles, Afghanistan, Singapore, Norway, Albania, Liberia, Samoa, Bosnia and Herzegovina, Sweden, Belize, Eritrea, Togo, Kyrgyzstan, Cape Verde, Uruguay, Guatemala, United States, Argentina, Mexico, Zimbabwe, China, Cyprus, Comoros, Philippines, Mauritius, Vietnam, Namibia, Serbia, Georgia, Mauritania, Turkey, Indonesia, Finland. A well-developed logistics system and a partnership network assist us to conduct our products anywhere in the globe with no delay without undermining product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are happy that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or place an order, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Finish |
ALB /ALBTFA | 1.0038 equiv. | Black Oxide |
ALB/ SALBTFA | 1.4301 equiv. | - |
Dimension | Tol. | Finish | Geometric | ||
0.0 | �0.3 | 6.0μm | Surfaces | 0.015 T.I.R | |
0.00 | �0.03 | 3.0μm | |||
0.000 | �0.015 | 1.6μm |
Part Number | ||
Type | Specifications | |
ALB | 140M | |
ALB | 151 | |
ALB | 553M |
Part Number | ||||||||||
Type | Width | A Length | Mount Hole (A) | Dowel(D) | Dowel(DA) | |||||
ALBTFA | 20 | - | A85 | - | N9 | - | D6 | - | DA6 | |
SALBTFA | 25 | - | A111 | - | N11 | - | D6 | - | DA8 |
Type | Hole Selection (A) / Material | Hole Selection (1) | Hole Selection (2) | A | W | B1 | B2 | B3 | B4 | ||||||
M10 | N11 | D Dowel Hole (1) | Z C'Bore (1) | DA Dowel Hole (2) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 150M | 151M | 140M | 141M | 8 F7 | +0.013/+0.028 | For M10 SHCS | 8 H6 | 0/+0.009 | 85 | 25 | 5 | 10 | 24 | 30 |
Type | Hole Selection (A) / Material | Hole Selection (1) | Hole Selection (2) | A | W | B1 | B2 | B3 | B4 | ||||||
M3/8 | N13/32 | D Dowel Hole (1) | Z C'Bore (1) | DA Dowel Hole (2) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 150 | 151 | 140 | 141 | 5/16" | 0/-0.0005 | For 3/8-16 SHCS | 5/16" | 0/-0.0005 | 85 | 25 | 5 | 10 | 24 | 30 |
Type | Hole Selection (A) / Material | Hole Selection (1) | Hole Selection (2) | A | W | B1 | B2 | B3 | B4 | ||||||
M8 | N9 | D Dowel Hole (1) | Z C'Bore (1) | DA Dowel Hole (2) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 330M | 331M | 340M | 341M | '6 F7 | +0.010/+0.022 | For M8 SHCS | 6 H6 | 0/+0.008 | 85 | 20 | 5 | 10 | 23 | 30 |
551M | 552M | 553M | 554M | 8 F7 | +0.013/+0.028 | For M8 SHCS | 8 H6 | 0/+0.009 | 85 | 20 | 5 | 10 | 23 | 30 |
Type | W Width | A Length (1mm inc.) | Mounting Hole Slelection (A) | Hole Selection (1) | Hole Selection (2) | Z C'Bore Hole (1) | B1 | B2 | B3 | B4 | ||
D Dowel Hole (1) | D Dowel Hole (2) | |||||||||||
Tolerance | Tolerance | |||||||||||
ALBTFB SALBTFB | 20 (Series) | 85 - 120 | N9 M8 | D6 F7 D8 F7 | +0.010/+0.022 +0.013/+0.028 | DA8 H6 DA6 H6 | 0/+0.008 | For M8 SHCS | A-55-25 | A-55-20 | A-55-7 | A-55 |
0/+0.009 | ||||||||||||
25 (Series) | 85 - 120 | N11 M10 | D8 F7 | +0.013/+0.028 | DA8 H6 | 0/+0.009 | For M10 SHCS | A-55-25 | A-55-20 | A-55-6 | A-55 | |