We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
AD1/AP-1F
Category
Proximity sensors
Description
Ind.M5,PNP-NO,M8,Sch-STD
Stock availability:
On request
If you are looking for MD Micro Detectors AD1/AP-1F, contact FAMAGA, the world's top producer of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outcomes and special attention to each buyer. We understand everyone, who worked with us - therefore, our regular buyers pick up the most desirable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such clients, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, South Sudan, China, Eritrea, Egypt, Guyana, Thailand, Mali, Benin, Hungary, Morocco, Burundi, Cameroon, Kuwait, Afghanistan, Singapore, Costa Rica, Togo, Philippines, Peru, Comoros, Ireland, Finland, El Salvador, Paraguay, Uruguay, Angola, Vietnam, Kyrgyzstan, Georgia, Israel, Tunisia, Syria, Eswatini, East Timor, Dominica, Antigua and Barbuda, South Korea, Indonesia, Djibouti, Zimbabwe, Brunei. A advanced logistics bond and a partnership network let us to send our goods anywhere in the globe as soon as possible without disreputing product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is growing every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Nominal sensing distance | 0,8mm |
Operanting distance | 0…0,65mm |
Standard target | 4x4mm FE360 |
Correction Factor | copper: 0,32 ± 10% / aluminium: 0,26 ± 10% / brass: 0,35 ± 10% / stainless steel: 0,66 ± 10% |
Thermal drift of Sr | < 10% |
Repeat Accuracy | 5% (UB 24V Ta=23°C ±5°C) |
Hysteresis | 1 … 20% |
Output type | PNP |
Output Function | NO |
Switching frequency | 5kHz |
Operating Voltage | 10...30Vdc |
No-Load supply current | ≤ 10mA |
Load current | ≤ 100mA |
Leakage current | ≤ 10μA |
Output voltage drop | ≤ 1,5V @100mA |
Max ripple content | ≤10% |
LED indicators | Yellow LED output state |
Time delay before availability | ≤ 50ms |
Short-circuit protection | Yes (auto-reset) |
Reverse Polarity Protection | Yes |
Protection against inductive loads | Yes |
Mounting | Shielded |
Dimensions | M5 x 0,5 / L = 38,4mm |
Weight | 4g |
Housing Material | AISI 303 Stainless Steel |
Connections | M8 Plug |
Active Head Material | PBT |
Tightening torque | 2Nm |
Operating temperature | -25°C…+70°C |
Diameter/Dimension | M5 |
Approvals | CE cULus |
EMC compatibility | IEC 60947-5-2 |
Shocks and vibrations | Vibration IEC 60068-2-6 / Shock IEC 60068-2-27 |
Degree of protection | IP67 |
Supplied Accessories | 2 nuts M5x0,5 |