We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence AP-33 , get in touch with FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and special attention to each purchaser. We respect everyone, who joined with us - thus, our regular buyers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Guinea, Malta, Turkmenistan, Morocco, United Arab Emirates, Belize, Swaziland, Belgium, Iraq, Brazil, North Korea, Israel, Cameroon, Tonga, Pakistan, Hungary, Kenya, Ecuador, Tanzania, El Salvador, Mozambique, Eswatini, Kiribati, New Zealand, Sudan, Nigeria, Bulgaria, Chile, Serbia, Tunisia, Comoros, Bosnia and Herzegovina, Angola, Austria, Uruguay, Moldova, Argentina, Ghana, Cyprus. A well-elaborated logistics connection and a partnership network let us to send our units anywhere in the globe promptly without discrediting product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | AP-33 | |
Type | Positive pressure, NPN | |
Rated pressure | 0 to 10.00 bar (0 to 1.000 MPa) | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm) | |
Display resolution | 0.01 bar, 0.2 Psi, 0.001 MPa, 0.01 kgf/cm2 | |
Detectable pressure range | -15 to +110 % of F.S. | |
Display temperature characteristic | ±1 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C) | |
Temperature fluctuation for analogue output | ±2 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C) | |
Response time (Chattering prevention function) | 2.5/5/100/500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V (Load impedance: 47 k? min.) |
Control output | 2 NPN open collector: 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less | |
Environmental resistance | Pressure resistance | 14.7 bar (1.47 MPa) |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable | |
Weight | Approx. 120 g (including 2 m cable) |