We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
AP-32KP
Type
Process Sensor
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Keyence AP-32KP , connect FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and personalseparate attention to each user. We understand everyone, who conspired with us - therefore, our regular customers accept the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Singapore, Malaysia, Uruguay, Norway, Angola, Iran, Honduras, Tajikistan, Egypt, Qatar, Poland, Croatia, Cyprus, Namibia, Canada, South Korea, Togo, Switzerland, Jordan, Libya, Vietnam, Cape Verde, Sweden, Costa Rica, Serbia, Fiji, Yemen, Burkina Faso, Laos, Philippines, Austria, El Salvador, Antigua and Barbuda, Latvia, Dominica, Guatemala, Ireland, Indonesia, Eswatini. A well-developed logistics series and a partnership network let us to deliver our units anywhere in the world promptly without compromising product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | AP-32KP | |
| Type | Positive pressure, PNP | |
| Rated pressure | 0 to 14.50 PSI | |
| Fluid type | Air or non-corrosive gases | |
| Type of pressure | Gauge pressure | |
| Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm) | |
| Display resolution | 0.02 Psi, 0.1 kPa, 0.001 kgf/cm2, 0.001 bar | |
| Detectable pressure range | -15 to +110 % of F.S. | |
| Display temperature characteristic | ±1 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C) | |
| Hysteresis | Variable (when hysteresis mode is selected), 0.5 % of F.S. in standard mode | |
| Response time (Chattering prevention function) | 2.5/5/100/500 ms (selectable) | |
| I/O | Analogue output | 1 to 5 V (Load impedance: 47 k? min.) |
| Control output | PNP open-collector 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less | |
| Environmental resistance | Pressure resistance | 4.9 bar (490 kPa) |
| Ambient temperature | 0 to +50 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable | |
| Weight | Approx. 120 g |
