We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Keyence AP-32 , contact FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each orderer. We appreciate everyone, who engaged with us - therefore, our regular purchasers pick up the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Netherlands, Panama, Bangladesh, Macedonia, Jamaica, Uruguay, Singapore, Congo, Burkina Faso, United Arab Emirates, Comoros, Cyprus, Vietnam, Brazil, Romania, Seychelles, Cape Verde, Djibouti, Cameroon, Kazakhstan, Togo, Serbia, East Timor, Tajikistan, Finland, El Salvador, Nepal, Mozambique, Greece, Qatar, Montenegro, Georgia, Malta, Brunei, Mauritius, Belarus, Mauritania, Swaziland, Kenya. A well-shaped logistics network and a partnership network let us to ship our units anywhere in the world promptly without damaging product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | AP-32 | |
Type | Positive pressure, NPN | |
Rated pressure | 0 to 1.000 bar (0 to 100.0 kPa) | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm) | |
Display resolution | 0.001 bar, 0.02 Psi, 0.1 kPa, 0.001 kgf/cm2 | |
Detectable pressure range | -15 to +110 % of F.S. | |
Display temperature characteristic | ±1 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C) | |
Temperature fluctuation for analogue output | ±2 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C) | |
Response time (Chattering prevention function) | 2.5/5/100/500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V (Load impedance: 47 k? min.) |
Control output | 2 NPN open collector: 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less | |
Environmental resistance | Pressure resistance | 4.9 bar (490 kPa) |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable | |
Weight | Approx. 120 g (including 2 m cable) |