We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
LK-G5001PV
Type
Mounting bracket
Description
Controller
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Keyence LK-G5001PV , get in touch with FAMAGA, the world's prime vendor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and particular attention to each client. We value everyone, who joined with us - thus, our regular customers obtain the most convenient purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such clients, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Mali, Brunei, Nepal, Mexico, Dominica, Latvia, North Korea, Benin, Luxembourg, Bahamas, Colombia, Uganda, Zimbabwe, Burundi, United Arab Emirates, Japan, Monaco, Angola, Fiji, Bangladesh, United States, Russia, Albania, Argentina, Cyprus, Indonesia, Mozambique, Suriname, Djibouti, Madagascar, Mauritania, Mongolia, Philippines, Kazakhstan, The Gambia, Malta, Yemen, Haiti, Poland, Sweden, Nigeria. A advanced logistics connection and a partnership network allow us to send our goods anywhere in the world with no delay without damaging product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as stay in control.
To consult or book, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Model | LK-G5001PV*1*2 | |
| Separate type | LK-G5001P/LK-HD500 | |
| Type | Main controller | |
| Sensor head compatibility | Compatible | |
| No. of connectable sensor heads | 2 | |
| Display | Minimum display unit | LK-HD500: 0.001 µm |
| Display range | LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable) | |
| Display cycle | LK-HD500: Approx. 10 times/sec. | |
| Display interface | Display port | Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected |
| LED indicator | LASER ON | |
| Terminal block | Analogue output voltage | ±10 V output, Output impedance: 100 ? |
| Analogue current output | 4 to 20 mA, Maximum load resistance: 350 ? | |
| No. of analogue outputs | 2 | |
| TIMING 1 input | Voltage input*3 | |
| RESET 1 input | ||
| Auto-zero 1 input | ||
| Laser control input | Voltage input*4 | |
| Laser remote input | Non-voltage input | |
| Alarm output | PNP open-collector output | |
| General comparator output | ||
| Expansion connector | TIMING input | Voltage input |
| RESET input | ||
| Auto-zero input | ||
| Program switching input | ||
| Binary selection input | ||
| Alarm output | PNP open-collector output | |
| Comparator output | ||
| Binary output | ||
| RS-232C interface | Baud rate: 9,600 to 115,200 bps Data length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd | |
| USB interface | USB 2.0 Hi-Speed compliant*5 | |
| Ethernet interface | 100Base-TX/10Base-T*6 | |
| EtherNet/IPTMinterface | Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14*7 | |
| PLC-Link | The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IPTM, CC-Link, and DeviceNetTM cannot be used in conjunction with PLC-Link | |
| Head expansion unit connector | Up to 10 head expansion units can be connected to one main controller | |
| Expansion unit connector | Either of the CC-Link unit (LK-CC100) or DeviceNetTM unit (LK-DN100) can be connected | |
| Power supply | Power supply voltage | 24 VDC ±10 % |
| Maximum current consumption | 0.6 A or less with 1 head/3.5 A or less with 12 heads | |
| Environmental resistance | Ambient temperature | When one or less head expansion unit is connected: 0 to +50 °C. When two or more head expansion units are connected: 0 to +40 °C. |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Weight | Approx. 600 g | |
| *1 PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA *2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to 'Precautions on wiring' in the User's Manual. *3 This input is applied to all of the synchronized OUT. *4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 1/2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. *5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. *6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. *7 The EtherNet/IPTM interface cannot be used when a CC-Link unit or a DeviceNetTM unit is installed. EtherNet/IPTM is supported by the latest controllers. For details on which controllers support EtherNet/IPTM , contact your nearest KEYENCE office. |
