We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
LK-G3001PV
Type
Mounting bracket
Description
CONTROLLER; POTENTIAL: 24 VDC, OUTPUT: 4-20 MA; MFR: KEYENCE; CABLE LENGTH: 2 M, FOR ANODE HEIGHT MEASURING DEVICE 1, ANODE DETECTION
Stock availability:
On request
Model | LK-G3001PV*1 | |
Separate type | LK-G3001P/LK-GD500*2 | |
Type | All-in-one model | |
Head compatibility | All LK-G sensor heads are compatible | |
Connectable number of heads | Maximum of 2 units | |
Display | Minimum display unit | 0.01 µm |
Display range | ±9,999.99 mm to ±9,999.99 µm (Selectable from six levels) | |
Display cycle | 10 times/sec. | |
Terminal block | Analogue voltage output | ±10 V x 2 outputs, output impedance: 100 ? |
Analogue current output | 4 to 20 mA x 2 outputs, maximum load resistance: 350 ? | |
Timing input | For OUT1, voltage input | |
Reset input | ||
Auto-zero input | ||
Laser remote interlock input | Non-voltage input | |
Comparator output | For OUT1, PNP open-collector output | |
Alarm output | For OUT1, PNP open-collector output (N.C.) | |
Expansion connector | Timing input | For OUT2, voltage input |
Reset input | ||
Auto-zero input | ||
Program switching input | Voltage input x 3 inputs | |
Laser-Off input | For Head A/Head B, voltage input | |
Comparator output | For OUT2, PNP open-collector output | |
Alarm output | For OUT2, PNP open-collector output (N.C.) | |
Binary | Binary output | Measured data output (21 bits), OUT1/OUT2 selectable, PNP open-collector output |
Strobe output | PNP open-collector output | |
Binary selector output | ||
Binary selector input | Voltage input | |
RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable) | |
USB interface | In conformity with USB Revision 2.0 Full speed (USB1.1 compatible) | |
Major functions | 2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | When connecting one measurement head 500 mA or less / When connecting two measurement heads 600 mA or less | |
Environmental resistance | Ambient temperature | 0 to +50 °C |
Relative humidity | 35 to 85 % RH (No condensation) | |
Weight | Approx. 480 g | |
*1 The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 1 V max. The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF current. *2 LK-G3001P can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W). |