We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
CV-3501P
Type
Mounting bracket
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Keyence CV-3501P , connect FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of merchandises and personalseparate attention to each purchaser. We understand everyone, who joined with us - therefore, our regular customers procure the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Estonia, Ghana, Guatemala, South Korea, Iran, India, Dominican Republic, Chad, Suriname, Antigua and Barbuda, Tunisia, Syria, Mauritius, Qatar, Honduras, Kiribati, Georgia, Ecuador, Cameroon, Eswatini, Croatia, Liberia, South Sudan, Panama, Burkina Faso, Mexico, Laos, Haiti, Uruguay, El Salvador, Niger, Cyprus, Sierra Leone, Nepal, Seychelles, Albania, Tajikistan, Serbia, Samoa, Philippines, Cape Verde, Costa Rica, Algeria, Togo, Afghanistan. A well-developed logistics connection and a partnership network allow us to deliver our goods anywhere in the world as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | CV-3501P | ||
| No. of pixels | When CV-200C/S200C/200M/S200M is connected • 2 megapixel mode : 1600 (H) x 1200 (V), approx. 1,920,000 pixels • 1 megapixel mode : 1024 (H) x 960 (V), approx. 980,000 pixels When CV-035C/S035C/035M/S035M is connected • Normal mode : 512 (H) x 480 (V), approx. 240,000 pixels | ||
| Camera input | • Two colour/monochrome cameras (CV-200C/ S200C/035C/S035C/200M/S200M/035M/ S035M can be connected. Mixed connection is possible.) • Two extra cameras can be connected by using expansion unit CV-E300. Up to four cameras can be connected. | ||
| No. of registered programs | Maximum 1000 programs each in the system and memory card (depending on the memory capacity and program data), externally selectable. | ||
| Number of screens that can be registered | Maximum 1000 screen for each program (depending on the capacity of the internal memory and memory card) Compression save function. | ||
| Internal memory capacity (Max. number of settings that can be registered, for reference) | About 60 MB (1000 settings)*1 | ||
| Window setting | Measurement area | 128 windows/1 program | |
| Mask area | 4 mask windows/1 inspection window | ||
| Colour extraction function (valid only when a colour camera is connected) | Colour binary processing, colour shade processing, gray scale processing (colours can be numerically specified with HSB or RGB values.) | ||
| Measurement tool | Area measurement | Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | |
| Position detection | Pattern search | • Multiple search possible • For both pattern area and search area, the shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions/1 area). | |
| V-search | • Simultaneous classification search through up to 256 patterns possible • For both pattern area and search area, the shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions/1 area) | ||
| ShapeTrax | • Multiple search possible • For both pattern area and search area, the shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions/1 area). | ||
| Edge position | • Angles can be measured. • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Trend edge position | • Circle or straight line can be measured from the detection result. • Shapes are rectangle, rotated rectangle, ring and arc. | ||
| Blob (Centre of gravity) | Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Inspection mode | Edge position | ||
| Edge pitch | |||
| Edge count | |||
| Edge angle | Shape is rectangle. | ||
| Pair edge | Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Trend edge width | Shapes are rectangle, rotated rectangle, ring and arc. | ||
| Blob (characteristic quantities) | • Number of blobs, centre of gravity, main axis angle, area, feret diameter, perimeter, roundness. • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Stain detection | • Subtract stain detection by using subtract filter • Stain grouping function supporting multiple stain detection and position measurement. • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Intensity inspection | Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle | ||
| Colour (only when a Colour camera is connected) | • RGB and HSV measurement supported • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) | ||
| Geometry | • Calculation result can be reflected. • Shapes are point, line, and circle. | ||
| OCR | • Character recognition for max. 2 lines of 20 characters per line • Shape is rectangle | ||
| Continuous capture function | • 1 to 32-time multi-measurement (maximum, minimum and average values) • Error values can be excluded from the measurement result. | ||
| Execution condition setting function | Can set whether to execute the results (OK/NG) for other measurement and calculation windows in each measurement window. | ||
| Image capturing setting function | Processing area setting function | • The applicable 980,000 pixels (1024 (H) x 960 (V)) can be captured from 1,980,000 pixels (1 megapixel mode). • The applicable 240,000 pixels (512 (H) x 480 (V)) can be captured from 320,000 pixels (normal mode). | |
| Scan mode (valid only when a monochrome camera is connected) | Progressive/interlace selectable | ||
| Capture start/end line setting function | Desired capture start/end line can be set within the image capture range. (Two lines are counted as one unit with the interlace method.) | ||
| Correction functions | Position adjustment | Batch, individual (maximum 64 settings), X, Y, ±180° rotation. | |
| Camera gain adjustment | Sensitivity adjustment, offset, and span adjustment (RGB batch/individual and span can be set for each of 16 brightness levels. RGB individual setting can be supported when colour camera is conencted.) | ||
| White balance adjustment (valid only when a colour camera is connected) | Manual setting using white paper | ||
| Filter function | Count | The same type of filter can be used up to 9 times. 13 steps. (For binarization and subtract only : 1 step/window) | |
| Type | Expand, shrink, average, median, edge sharpening, edge extract X, edge extract Y, Sobel, Prewitt, Roberts, Laplacian, binary, subtract, illumination adjustment, contrast conversion, image extraction | ||
| Scaling function | X and Y calibration setting for each camera. Conversion from measurement values and calculation values is supported. | ||
| Calculation functions | Numerical operation | No. of settings | 128 calculations/1 program |
| Arithmetic operation | Sum (+), subtract (-), multiply (x), divide (?) | ||
| Arithmetic function | Square, exponential, counting fractions as one, round-off fractions, maximum, minimum, average, average within range, square root, absolute value, remainder, distance, angle, sin, cos, tan, asin, acos, atan, ? | ||
| Comparative operator | <, ==, Not | ||
| Geometric calculation | Distance between 2 points, angle of line segment, circle radius, circle centre, average angle, straight line, cross point, distance between a point and a straight line, straight line angle, angle between the two crossed lines, perpendicular line between a point to a line, perpendicular bisector , midpoint | ||
| Coordinate conversion function. | Coordinate system conversion, rotating matrix | ||
| Type conversion function | Coordinate constant conversion, constant coordinate conversion, angle unit conversion | ||
| Logical operator | AND, OR, NOT, XOR | ||
| Sort function | Maximum value index output, minimum value index output | ||
| System function | Number of measurement times, measurement time, year, month, day, time, minute, second | ||
| Time axis operation function | Previous measurement result acquisition operator | ||
| Command memory | 128 command memories that can be rewritten from external devices or the remote control console during operation are installed. | ||
| Support functions | Statistics analysis | No. of data | Max. 20000 data (can be saved into a memory card in a batch) |
| Statistical item | Maximum, minimum, average value, deviation (3?), total status OK/NG times | ||
| Screen save (valid when monochrome and colour cameras are connected) | The following number of images can be saved in the systemis memory : • Maximum 511 images (monochrome camera normal mode) • Maximum 127 images (monochrome camera 1 megapixel mode) • Maximum 63 images (monochrome camera 2 megapixel mode) • Maximum 169 images (colour camera normal mode) • Maximum 41 images (colour camera 1 megapixel mode) • Maximum 22 images (colour camera 2 megapixel mode) (These are the maximum values with only one camera connected, and [Condition] set to [All Images].) | ||
| Programming aid functions | Image Zoom | Between 4% and 1600% during setting or operation (6% and 2500% during full screen display) (Size can be set for each screen while diplaying multiple screens.) | |
| Edge derivative wave display | Edge waveform can be graphically displayed during setting or operation, and edge intensity and measurement values (some are not supported) can be displayed during setting. | ||
| Profile display | Trend edge position and gap can be graphically displayed during setting or operation. | ||
| Stability display | Stain detection (stain level) is displayed during setting or operation. | ||
| Shift all windows | Selected windows from an identical camera or an identical registered image can be shifted in the desired XY direction in a group. | ||
| Display template setting function | No. of display templates | 10 templates/1 program (within which 4 templates are specified values), externally selectable | |
| No. of screens that can be displayed simultaneously | Max. 5 screens can be displayed at the same time (when 5 scr. (HORIZONTAL)/5 scr. (VERTICAL) is selected). | ||
| Hold image | Up to the past three images (NG images) can be displayed as hold images. measurement results and measurement time can be viewed. (The number of displayable times varies between 0 and 3 depending on camera's connection state.) | ||
| Screen customisation function | No. of customisation screens | 10 screens/1 program | |
| Custom item | Character string : Measurement value (decimal point can be specified), result, custom character, graphics, active text | ||
| Measurement result interlink | • Display colour can be changed according to the result for figures and custom characters. • Can set a message in the allocation table that relates to the measurement value (active text) | ||
| Custom menu function | Shortcut menu to a desired program screen can be created (20 menus/program). | ||
| Operation rewrite function | Upper/lower tolerance or command memory can be rewritten during opration. | ||
| Memory card save function | • Measurement value, judgment result, NG count, measurement image (compressible), stored image (compressible), captured image, statistics analysisdata, RS-232C communication log, program data• Can save data during test run (except for program data). | ||
| Others | Screen capture function, password function, re-test function, file management function, I/O monitoring, RS-232C monitoring (with log save function) | ||
| Memory card | Supports NR-M32 (32 MB), GR-M256 (256 MB), and CV-M1G (1 GB). Supports VFAT and FAT32. | ||
| Interface | Control input | External trigger input | Images from up to four cameras can be captured at the same time (except for colour megapixel cameras). Individual capture can be selected (when CV-E300 is not connected, images from up to two cameras can be captured at the same time). |
| Control input | 18 inputs Input rating 26.4 V or less, 2 mA or more | ||
| Control output | Universal output | 27 outputs PNP (including two FLASH outputs linked to external trigger.) | |
| Total comparator output | 1 output, PNP open collector, maximum 50 mA (30 V or less) | ||
| Monitor output | SVGA 800x600 (24-bit colour 60 Hz) | ||
| RS-232C | Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. Maximum baud rate of 115200 bps is supported. | ||
| PLC link | Numerical value output and control input/output using the RS-232C port or Ethernet port enabled. Following PLCs are supported via link unit : • KEYKENCE CORP. : KV-700 series, KV-1000 series • Mitsubishi Electric : A series (RS-232C only), Q series • OMRON : SYSMAC C series (RS-232C only), CJ/CJ1 series | ||
| Ethernet | Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. 100BASE-TX/10BASE-T | ||
| USB | Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. USB2.0, HI-SPEED supported | ||
| Display language | Japanese/English/German selectable | ||
| Rating | Power voltage | 24 VDC ±10 % | |
| Current consumption | 1.8 A (2 cameras at maximum load)/2.8 A (4 cameras at maximum load) | ||
| Environmental resistance | Ambient temperature | With two cameras connected: 0 to +50 °C (0 to +45 °C with megapixel cameraconnected) With four cameras connected: 0 to +45 °C (0 to +40 °C with megapixel cameraconnected) | |
| Relative humidity | 35 to 85 % RH (No condensation) | ||
| Weight | Approx. 950 g | ||
| *1 Typical example when using standard mode : monochrome camera x 1, registered image x1 compressed, 9 measurement windows |
