We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Hengstler RAS , connect FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and individual attention to each user. We understand everyone, who conspired with us - therefore, our regular clients accept the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Liechtenstein, Dominican Republic, Romania, Mozambique, Comoros, Jordan, Austria, Mauritania, Argentina, Suriname, Jamaica, Afghanistan, Slovakia, The Bahamas, Haiti, Tonga, Estonia, Kiribati, Poland, Cape Verde, Seychelles, Pakistan, Albania, Senegal, Djibouti, Fiji, Morocco, Mexico, United States, Eswatini, Indonesia, Belize, Zimbabwe, Niger, Burkina Faso, Georgia, Sweden, Sudan, Cyprus, Samoa. A advanced logistics series and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Function / Application | Safety relay |
Product line | KACO |
Relay family | RAS |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Ambient temperature [°C] | -25 ... +70 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements | RoHS |
Number of NO contacts | 2 ... 3 |
Number of NC contacts | 1 ... 2 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 36,0 x 12,5 x 29,0 mm |
Housing |
|
Shock resistance NO / NC [g] | 10/10 g |
Puls duration (half sinus) | 16 ms |
Vibration resistance NO / NC [g] | 5/5 g |
Frequency range [Hz] | 10 - 55 Hz |
Operating time NC contact, contact opens [ms] | 6 ms |
Operating time NO contact, contact closes [ms] | 12 ms |
Releasing time NO contact, contact opens [ms] | 4 ms |
Releasing time NC contact, contact closes [ms] | 6 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 25 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 5 ... 110 V |
Coil resistance [Ohm] | 45 ... 15,440 Ohm |
Contact material |
|
Max. switching current [A] | 6 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 1500 VA |
Switching capacity AC-15 at 230 V [Ie in A] |
|
Switching capacity DC-13 at 24 V [Ie in A] |
|
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 6 A |
Insulation | Basic insulation |
Function / Application | Safety relay |
Product line | KACO |
Relay family | RAS |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Ambient temperature [°C] | -25 ... +70 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements | RoHS |
Number of NO contacts | 2 ... 3 |
Number of NC contacts | 1 ... 2 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 36,0 x 12,5 x 29,0 mm |
Housing |
|
Shock resistance NO / NC [g] | 10/10 g |
Puls duration (half sinus) | 16 ms |
Vibration resistance NO / NC [g] | 5/5 g |
Frequency range [Hz] | 10 - 55 Hz |
Operating time NC contact, contact opens [ms] | 6 ms |
Operating time NO contact, contact closes [ms] | 12 ms |
Releasing time NO contact, contact opens [ms] | 4 ms |
Releasing time NC contact, contact closes [ms] | 6 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 25 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 5 ... 110 V |
Coil resistance [Ohm] | 45 ... 15,440 Ohm |
Contact material |
|
Max. switching current [A] | 6 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 1500 VA |
Switching capacity AC-15 at 230 V [Ie in A] |
|
Switching capacity DC-13 at 24 V [Ie in A] |
|
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 6 A |
Insulation | Basic insulation |