We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Hengstler
Country
USA
Name
464
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Hengstler 464 , connect FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and particular attention to each buyer. We understand everyone, who collaborated with us - therefore, our regular purchasers get the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Burundi, Slovenia, Sri Lanka, Monaco, Italy, Afghanistan, Madagascar, Malta, Bulgaria, Poland, Slovakia, East Timor, Qatar, Brunei, Rwanda, South Sudan, Romania, Tanzania, Albania, Iceland, Mexico, Peru, Latvia, Ireland, Botswana, Australia, Luxembourg, Syria, Indonesia, Mauritania, Ukraine, Kuwait, Tunisia, Angola, Israel, Seychelles, Malaysia, Mauritius, Sierra Leone, Switzerland, United States. A well-shaped logistics chains and a partnership network guide us to ship our items anywhere in the world on-time without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Function / Application | Safety relay |
| Product line | HENGSTLER |
| Relay family | 464 |
| Contactset | forcibly guided |
| According EN 50205 | Application type A |
| Ambient temperature [°C] | -25 ... +80 °C |
| Soldering heat resistance [°C] | 260 °C |
| Max. soldering time [s] | 5 s |
| Pins pre-soldered with | Sn 100 |
| Approval |
|
| Standards |
|
| Meets the requirements |
|
| Number of NO contacts | 2 ... 8 |
| Number of NC contacts | 2 ... 7 |
| Number of CO contacts | 0 |
| Size | 3 / 4 |
| Dimensions L x W x H [mm] |
|
| Housing | dustproof (RT II) |
| Shock resistance NO / NC [g] | 10/10 g |
| Puls duration (half sinus) | 16 ms |
| Vibration resistance NO / NC [g] | 10/10 g |
| Frequency range [Hz] | 10 - 55 Hz |
| Operating time NC contact, contact opens [ms] | 22 ms |
| Operating time NO contact, contact closes [ms] | 29 ms |
| Releasing time NO contact, contact opens [ms] | 5 ms |
| Releasing time NC contact, contact closes [ms] | 7 ms |
| Mechanical service life (without load) | 10,000,000 switching cycles |
| Connection type |
|
| Fixing type | Contact: Solder pins |
| Drive system |
|
| Nominal coil voltage [V] |
|
| Nominal coil current [A] | 5 ... 220 V |
| Resistance tolerance [%] | 10 ... 73,700 Ohm |
| Max. switching current [A] |
|
| Continuous current Ith2 at same time over 2 contacts [A] | 10 A |
| Max. switching capacity [VA] | 230/240 V |
| Max. switching capacity [W] | 2000 VA |
| Switching capacity DC-13 at 24 V [Ie in A] | 4 A |
| Contact gap about open contact | 2 A |
| Short-circuit capacity 1000 A / AC 230 V [A] | 100,000 cycles |
| Insulation | 10 A |
| Function / Application | Safety relay |
| Product line | HENGSTLER |
| Relay family | 464 |
| Contactset | forcibly guided |
| According EN 50205 | Application type A |
| Ambient temperature [°C] | -25 ... +80 °C |
| Soldering heat resistance [°C] | 260 °C |
| Max. soldering time [s] | 5 s |
| Pins pre-soldered with | Sn 100 |
| Approval |
|
| Standards |
|
| Meets the requirements |
|
| Number of NO contacts | 2 ... 8 |
| Number of NC contacts | 2 ... 7 |
| Number of CO contacts | 0 |
| Size | 3 / 4 |
| Dimensions L x W x H [mm] |
|
| Housing | dustproof (RT II) |
| Shock resistance NO / NC [g] | 10/10 g |
| Puls duration (half sinus) | 16 ms |
| Vibration resistance NO / NC [g] | 10/10 g |
| Frequency range [Hz] | 10 - 55 Hz |
| Operating time NC contact, contact opens [ms] | 22 ms |
| Operating time NO contact, contact closes [ms] | 29 ms |
| Releasing time NO contact, contact opens [ms] | 5 ms |
| Releasing time NC contact, contact closes [ms] | 7 ms |
| Mechanical service life (without load) | 10,000,000 switching cycles |
| Connection type |
|
| Fixing type | Contact: Solder pins |
| Drive system |
|
| Nominal coil voltage [V] |
|
| Nominal coil current [A] | 5 ... 220 V |
| Resistance tolerance [%] | 10 ... 73,700 Ohm |
| Max. switching current [A] |
|
| Continuous current Ith2 at same time over 2 contacts [A] | 10 A |
| Max. switching capacity [VA] | 230/240 V |
| Max. switching capacity [W] | 2000 VA |
| Switching capacity DC-13 at 24 V [Ie in A] | 4 A |
| Contact gap about open contact | 2 A |
| Short-circuit capacity 1000 A / AC 230 V [A] | 100,000 cycles |
| Insulation | 10 A |
