We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Hengstler 473 , make contact with FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of goods and private attention to each consumer. We praise everyone, who worked with us - thus, our regular consumers obtain the most desirable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, The Gambia, Lebanon, Spain, Portugal, Uzbekistan, Congo, Ghana, Bulgaria, Malaysia, Yemen, Czech Republic, Myanmar, Belarus, Equatorial Guinea, Denmark, Turkey, Mozambique, Belize, Saudi Arabia, Switzerland, Lithuania, Peru, Kazakhstan, Zambia, Montenegro, Niger, Argentina, Suriname, Mongolia, Sudan, Senegal, Hungary, Djibouti, Australia, Philippines, Antigua and Barbuda, Poland, Paraguay, Andorra, Algeria, Jordan, Ukraine, Brazil. A well-built logistics bond and a partnership network guide us to dispatch our items anywhere in the globe on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Function / Application | Safety relay |
Product line | HENGSTLER |
Relay family | 473 |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Contact behaviour | fault tolerant |
Ambient temperature [°C] | -25 ... +75 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements |
|
Number of NO contacts | 2 ... 4 |
Number of NC contacts | 2 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 47,7 x 35,7 x 15,7 mm |
Housing | dustproof (RT II) |
Shock resistance NO / NC [g] | 10/8 g |
Puls duration (half sinus) | 11 ms |
Vibration resistance NO / NC [g] | 10/5 g |
Frequency range [Hz] | 10 - 200 Hz |
Operating time NC contact, contact opens [ms] | 16 ms |
Operating time NO contact, contact closes [ms] | 21 ms |
Releasing time NO contact, contact opens [ms] | 6 ms |
Releasing time NC contact, contact closes [ms] | 11 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 50 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 5 ... 110 V |
Coil resistance [Ohm] | 26 ... 12,600 Ohm |
Contact material |
|
Max. switching current [A] | 6 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 1380 VA |
Switching capacity AC-15 at 230 V [Ie in A] | 3 A |
Switching capacity DC-13 at 24 V [Ie in A] | 2,5 A |
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 6 A |
Insulation | Reinforced insualtion |
Function / Application | Safety relay |
Product line | HENGSTLER |
Relay family | 473 |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Contact behaviour | fault tolerant |
Ambient temperature [°C] | -25 ... +75 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements |
|
Number of NO contacts | 2 ... 4 |
Number of NC contacts | 2 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 47,7 x 35,7 x 15,7 mm |
Housing | dustproof (RT II) |
Shock resistance NO / NC [g] | 10/8 g |
Puls duration (half sinus) | 11 ms |
Vibration resistance NO / NC [g] | 10/5 g |
Frequency range [Hz] | 10 - 200 Hz |
Operating time NC contact, contact opens [ms] | 16 ms |
Operating time NO contact, contact closes [ms] | 21 ms |
Releasing time NO contact, contact opens [ms] | 6 ms |
Releasing time NC contact, contact closes [ms] | 11 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 50 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 5 ... 110 V |
Coil resistance [Ohm] | 26 ... 12,600 Ohm |
Contact material |
|
Max. switching current [A] | 6 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 1380 VA |
Switching capacity AC-15 at 230 V [Ie in A] | 3 A |
Switching capacity DC-13 at 24 V [Ie in A] | 2,5 A |
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 6 A |
Insulation | Reinforced insualtion |