We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Hengstler tico 772 , make contact with FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of goods and private attention to each orderer. We praise everyone, who engaged with us - thus, our regular consumers pick up the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Peru, Sri Lanka, Ukraine, Belize, Cuba, Palestine, Botswana, Burma, Algeria, Dominica, Ecuador, Moldova, Netherlands, Costa Rica, Nigeria, Mauritania, Montenegro, Afghanistan, Chad, Ghana, Uzbekistan, New Zealand, Jordan, Thailand, Cameroon, Austria, Eswatini, Angola, Uganda, South Korea, North Korea, Samoa, Laos, Mauritius, Sierra Leone, Argentina, India, Mongolia, Hungary, Australia. A well-built logistics network and a partnership network let us to dispatch our units anywhere in the globe promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Product Family | tico 772 |
Function | Tachometer |
Technology | Electronic |
Digits | 6-digit |
Display |
|
Preset | 3 presets |
Digit Height [mm] |
|
Display Variant |
|
View Angle | 12:00 |
Relay | 1 or 1 relays |
Voltage |
|
Reset |
|
Signal Times | 0.01 s to 599.99 s or bistable, programmable, tolerance + 10 ms, active on/off |
Current Consumption [mA] |
|
Power Consumption | < 5 W?<8 W |
Cable Cross-Section | 1...1.5 mm? (0.0015...0.0023 in?) with multicore cable end |
Input Resistance | approx. 10 kOhm |
Pulse Length min. | 17 ms (30 Hz), 8 µs (60 kHz) |
Supply Voltage |
|
Count Frequency [Hz] |
|
Overload Protection |
|
Overload Protection Relay Output |
|
Sensor Supply |
|
Storage of Values | NVM> 10 years |
Electrical Connection | pluggable screw terminals / connecting clamps |
Amplitude Threshold |
|
Active Edge | programmable, positive with PNP input, negative with NPN input |
Pulse Shape | any square wave (1:1 for max. frequency) |
Prescaler | 0.0001 - 99.9999 |
Set Function | set to VW 0 (independent of resets) |
Display and Preset Range | - 999 999 to + 999 999 |
Alarm Signal |
|
Relay (Preset 1 and 2) |
|
Transistor output (Preset 1 + 2) |
|
Application Output |
|
Attention |
|
Counter Mode Input A,B |
|
Preselect Modes |
|
Application Input/Output (Counter) |
|
Mode | batch counter with preset or 2. totalizing counter with preset |
Count Mode |
|
Product Family | tico 772 |
Function | Tachometer |
Technology | Electronic |
Digits | 6-digit |
Display |
|
Preset | 3 presets |
Digit Height [mm] |
|
Display Variant |
|
View Angle | 12:00 |
Relay | 1 or 1 relays |
Voltage |
|
Reset |
|
Signal Times | 0.01 s to 599.99 s or bistable, programmable, tolerance + 10 ms, active on/off |
Current Consumption [mA] |
|
Power Consumption | < 5 W?<8 W |
Cable Cross-Section | 1...1.5 mm? (0.0015...0.0023 in?) with multicore cable end |
Input Resistance | approx. 10 kOhm |
Pulse Length min. | 17 ms (30 Hz), 8 µs (60 kHz) |
Supply Voltage |
|
Count Frequency [Hz] |
|
Overload Protection |
|
Overload Protection Relay Output |
|
Sensor Supply |
|
Storage of Values | NVM> 10 years |
Electrical Connection | pluggable screw terminals / connecting clamps |
Amplitude Threshold |
|
Active Edge | programmable, positive with PNP input, negative with NPN input |
Pulse Shape | any square wave (1:1 for max. frequency) |
Prescaler | 0.0001 - 99.9999 |
Set Function | set to VW 0 (independent of resets) |
Display and Preset Range | - 999 999 to + 999 999 |
Alarm Signal |
|
Relay (Preset 1 and 2) |
|
Transistor output (Preset 1 + 2) |
|
Application Output |
|
Attention |
|
Counter Mode Input A,B |
|
Preselect Modes |
|
Application Input/Output (Counter) |
|
Mode | batch counter with preset or 2. totalizing counter with preset |
Count Mode |
|