We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET1-AR-CRA-CH-50X-SG-105763
Part number
105763
Description
Schalter schützende CET1-AR-CRA-CH-50X-SG
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET1-AR-CRA-CH-50X-SG-105763 105763, call FAMAGA, the world's leading provider of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of outcomes and particular attention to each consumer. We value everyone, who cooperated with us - so, our regular purchasers obtain the most attractive purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Jordan, Bahrain, Uruguay, Czech Republic, Chile, Burundi, Samoa, Oman, El Salvador, Costa Rica, Paraguay, Gambia, Sierra Leone, Montenegro, Turkmenistan, Japan, Slovakia, Mozambique, Liechtenstein, Saudi Arabia, North Korea, Algeria, South Sudan, Nigeria, Thailand, Israel, Australia, Latvia, Austria, Andorra, Estonia, Bulgaria, Peru, Norway, Macedonia, Moldova, Sweden, Laos, Tajikistan, Ghana, Brazil, Iceland, Vietnam. A advanced logistics chains and a partnership network cheer us to conduct our elements anywhere in the world with no delay without damaging product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
| CET1 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | freely configurable |
| LED 2 gn | freely configurable |
| OUT | Monitoring output (semiconductor) |
| RST | Reset input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| X | ±5 mm |
| Y | ±5 mm |
| Z | ±4 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED1, LED2 | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 8 A |
| External (operating voltage UCM) | 0,5 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Monitoring output OUT | |
| Type of output | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Output current | |
| OUT | 1 ... 50 mA |
| Safety outputs OA/OB | |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| Low U(OA,OB) | 0 ... 1 V DC |
| High U(OA,OB) | UB-1,5V ... UB V DC |
| Output current | |
| per safety output | 1 ... 200 mA |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Single device | max.400 ms |
| Delay per device | 5 ms |
| Switch-on time | |
| Safety outputs | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
| Mission time | 20 y |
