We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET1-AR-CRA-AH-50F-SH-C2312-110943
Part number
110943
Description
Sicherheitsschalter CET1-AR-CRA-AH-50F-SH-C2312-110943
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET1-AR-CRA-AH-50F-SH-C2312-110943 110943, catch up with FAMAGA, the world's major vendor of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of outputs and individual attention to each consumer. We esteem everyone, who liased with us - hence, our regular clients obtain the most beneficial purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4500 such buyers, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Brunei, Australia, Uruguay, Comoros, Serbia, Eswatini, Sweden, Hungary, Brazil, Cyprus, Ireland, Burundi, The Bahamas, Tonga, Niger, Nigeria, Ecuador, Mozambique, Uzbekistan, Thailand, Croatia, Kazakhstan, Ghana, Malta, Georgia, Moldova, The Gambia, Iran, Burkina Faso, Iceland, Jordan, Kyrgyzstan, Haiti, Paraguay, Central African Republic, Mauritania, Israel, Syria, Greece, Bosnia and Herzegovina. A well-built logistics connection and a partnership network assist us to conduct our goods anywhere in the globe immediately without undermining product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To ask a question or book, get in touch with us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
| CET1 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | freely configurable |
| LED 2 gn | freely configurable |
| OUT | Monitoring output (semiconductor) |
| RST | Reset input |
| J | Teach-in input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP65/IP67 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| X | ±5 mm |
| Y | ±5 mm |
| Z | ±4 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 1 plug connector M23, 19-pin, RC18 |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED1 , LED2 | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UCM) | 0,5 ... 8 A |
| External (operating voltage UB) | 0,25 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| High U(OA,OB) | UB-1,5V ... UB V DC |
| Low U(OA,OB) | 0 ... 1 V DC |
| Output current | |
| per safety output | 1 ... 200 mA |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Delay per device | 5 ms |
| Single device | max.400 ms |
| Switch-on time | |
| Safety outputs | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Teach-in input J | |
| Input voltage | |
| High | 15 ... 27,6 V DC Teach-in input J |
| Low | 0 ... 1 V DC Teach-in input J |
| Monitoring output OUT | |
| Type of output | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Output current | |
| OUT | 1 ... 50 mA |
| Repeat accuracy R | 10 % |
| C number | |
| C2312 | Extended escape release |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
| Mission time | 20 y |
