We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET2-AR-CRA-AH-50X-SG-110240
Part number
110240
Stock availability:
On request
If you are looking for Euchner CET2-AR-CRA-AH-50X-SG-110240 110240, contact FAMAGA, the world's prime vendor of machine made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of outcomes and individual attention to each user. We esteem everyone, who joined with us - therefore, our regular consumers procure the most beneficial purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Canada, Netherlands, Portugal, Palestine, Slovenia, Australia, Comoros, South Sudan, France, El Salvador, Cuba, Zimbabwe, Japan, Czech Republic, Iraq, Ireland, Zambia, Poland, Eritrea, Ukraine, Azerbaijan, Liberia, Tajikistan, Kuwait, Guyana, Estonia, Malaysia, Israel, Antigua and Barbuda, Burkina Faso, Albania, Slovakia, Haiti, Switzerland, Russia, Nepal, Guatemala, Georgia, Samoa, Benin, Tonga, Serbia, Angola, Jamaica, Finland, Syria, Niger. A well-elaborated logistics connection and a partnership network let us to dispatch our goods anywhere in the planet promptly without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To ask a question or place an order, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
CET2 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | freely configurable |
LED 2 gn | freely configurable |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
J | Teach-in input |
Housing material | |
Safety switch housing | Die-cast aluminum |
Slide | Stainless steel |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Y | ±5 mm |
Z | ±4 mm |
Ready delay | 10 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5 and 8-pin |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED1 , LED2 | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.14 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
High U(OA,OB) | UB-1,5V ... UB V DC |
Low U(OA,OB) | 0 ... 1 V DC |
Output current | |
per safety output | 1 ... 200 mA |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Delay per device | 5 ms |
Switch-on time | |
Safety outputs | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Teach-in input J | |
Input voltage | |
High | 15 ... 27,6 V DC Teach-in input J |
Low | 0 ... 1 V DC Teach-in input J |
Monitoring output OUT | |
Type of output | Semiconductor output, p-switching, short circuit-proof |
Output voltage | |
OUT | 0,8xUB ... UB V DC |
Output current | |
OUT | 1 ... 50 mA |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head upward | 3 |
Head downward or horizontal | 4 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Mission time | 20 y |