We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET2-AR-CRA-AH-50X-SH-110205
Part number
110205
Stock availability:
On request
If you are pursuing Euchner CET2-AR-CRA-AH-50X-SH-110205 110205, catch up with FAMAGA, the world's leading company of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are symbolized in the quality of items and special attention to each client. We value everyone, who engaged with us - so, our regular purchasers pick up the most attractive purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Oman, Japan, Congo, Belgium, Colombia, New Zealand, Mexico, Russia, Myanmar, Angola, Bahamas, Tajikistan, Monaco, Libya, Sierra Leone, Guatemala, Lithuania, Mozambique, Netherlands, Macedonia, Ecuador, Gambia, Singapore, Nepal, Nicaragua, Luxembourg, Qatar, Rwanda, Tunisia, South Korea, Finland, Chile, Zimbabwe, Bolivia, El Salvador, Morocco, Egypt, Jamaica, Pakistan, United States, Andorra, Peru, The Gambia, Philippines, Samoa, East Timor, Slovakia. A well-built logistics network and a partnership network cheer us to ship our products anywhere in the planet immediately without damaging product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as to stay on the top.
To get some advice or order, contact us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
CET2 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | freely configurable |
LED 2 gn | freely configurable |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
J | Teach-in input |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65/IP67 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Y | ±5 mm |
Z | ±4 mm |
Ready delay | 10 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M23, 19-pin, RC18 |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED1 , LED2 | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.14 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
High U(OA,OB) | UB-1,5V ... UB V DC |
Low U(OA,OB) | 0 ... 1 V DC |
Output current | |
per safety output | 1 ... 200 mA |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Delay per device | 5 ms |
Switch-on time | |
Safety outputs | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Teach-in input J | |
Input voltage | |
High | 15 ... 27,6 V DC Teach-in input J |
Low | 0 ... 1 V DC Teach-in input J |
Monitoring output OUT | |
Type of output | Semiconductor output, p-switching, short circuit-proof |
Output voltage | |
OUT | 0,8xUB ... UB V DC |
Output current | |
OUT | 1 ... 50 mA |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head downward or horizontal | 4 |
Head upward | 3 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Mission time | 20 y |