We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET2-AR-CRA-CH-50X-SG-110082
Part number
110082
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Euchner CET2-AR-CRA-CH-50X-SG-110082 110082, get in touch with FAMAGA, the world's prime distributor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are symbolized in the quality of items and private attention to each user. We value everyone, who conspired with us - thus, our regular purchasers accept the most attractive purchase terms and discounts on the industrial equipment market. At present, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Netherlands, Nicaragua, Bhutan, Singapore, Bangladesh, Indonesia, Georgia, Burma, Philippines, Belgium, Ghana, Honduras, Burkina Faso, Argentina, Afghanistan, Guyana, Nigeria, Antigua and Barbuda, Azerbaijan, Japan, Dominica, El Salvador, Finland, Vietnam, Paraguay, Tonga, Comoros, Benin, Kyrgyzstan, Fiji, Cape Verde, Jamaica, Syria, South Korea, Qatar, Ireland, Mauritania, Norway, Pakistan, Croatia, Cyprus, United States, Zimbabwe, Rwanda. A well-elaborated logistics series and a partnership network guide us to ship our elements anywhere in the planet on-time without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or book, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| CET2 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | freely configurable |
| LED 2 gn | freely configurable |
| OUT | Monitoring output (semiconductor) |
| RST | Reset input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| X | ±5 mm |
| Y | ±5 mm |
| Z | ±4 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Open-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED1 , LED2 | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 8 A |
| External (operating voltage UCM) | 0,5 ... 8 A |
| Power consumption | |
| Solenoid | max.14 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| High U(OA,OB) | UB-1,5V ... UB V DC |
| Low U(OA,OB) | 0 ... 1 V DC |
| Output current | |
| per safety output | 1 ... 200 mA |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Delay per device | 5 ms |
| Single device | max.400 ms |
| Switch-on time | |
| Safety outputs | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Monitoring output OUT | |
| Type of output | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Output current | |
| OUT | 1 ... 50 mA |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head downward or horizontal | 4 |
| Head upward | 3 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Mission time | 20 y |
