We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Euchner MGB-L2B-PN-R-109825 109825, reach FAMAGA, the world's the best supplier of manufacturing equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each client. We admire everyone, who collaborated with us - thus, our regular buyers receive the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such consumers, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Spain, Turkmenistan, Burundi, Japan, Liberia, Zimbabwe, Iran, Tonga, Eritrea, Denmark, Singapore, Swaziland, Malawi, Libya, Mauritania, Senegal, Belize, Finland, Malaysia, The Gambia, Liechtenstein, Algeria, Argentina, Kiribati, Indonesia, Vietnam, Montenegro, Slovakia, Afghanistan, Jordan, Laos, Andorra, Iraq, Paraguay, Norway, Hungary, Kyrgyzstan, China, Brazil, Eswatini, Kenya, Chile, Cameroon, Mexico. A advanced logistics system and a partnership network cheer us to ship our products anywhere in the world on-time without discrediting product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Reaction time | |
Emergency stop / machine stop | max.250 ms Switch-off time |
Door position | max.550 ms Switch-off time |
Bolt position | max.550 ms Switch-off time |
Guard locking | max.550 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | |
Push-pull power | |
Push-pull power | |
According to IEC 61076-3-117 variant 14, screened, Profinet I/O cable, at least cat. 5e | Push-pull RJ45 |
Push-pull RJ45 | |
Guard locking principle | Open-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Profinet I/O cable, at least cat. 5e |
Safety class | III |
Transponder coding | Multicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Profinet (IEC 61158 type 10) |
Safety protocol | Profisafe (IEC 61784-3-3) |
Belegungsschema | B3 |
Belegungsschema | L0 |
Position 7 | |
Ausfuhrung | Emergency stop illuminated |
Einlegeschild | |
Extras | With adhesive ring |
Farbe | |
Schaltelement | 2 pos. driven NC |
Position 8 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | white |
Schaltelement | 1NO |
Position 9 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | white |
Schaltelement | 1NO |
Product version number | V3.30.10 |
Slide-in label | |
2 pcs. without marking | |
Anforderung | |
Quittieren | |
Acknowl. Start station | |
Access request | |
Load On start station |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.07 x 10-8 |
Diagnostic Coverage (DC) | 99 |
Emergency stop | |
B10D | |
Emergency stop | 0.1 x 106 |
Emergency-stop evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10-8 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |