select
  • Brand
  • Product

+49 (451) 703 64 997

cart
Eng Worldwide
select
  • Brand
  • Product

+49 (451) 703 64 997

cart
Eng Worldwide

We are not the manufacturer, authorised distributor or authorised representative of the DUDEK-PUMPEN brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

DUDEK-PUMPEN

Selling any product from the catalog DUDEK-PUMPEN at good prices

Vendor code
Description
Price
I/a-Sph
Fördergut: Thermalöl Eigenschaften: nicht korrosiv, nicht abrasiv, ohne Feststoffe Verwendung als: Befüll- und Entleerpumpe für Thermalölsystem Ersatz/Reserve für: D/49557 Einsatz in: kein Ex-Bereich Betriebstemperatur (Bt.): max. 250 °C beim Entleeren Spez. Gewicht ( Bt.): 0,9 kg/l * Umgebungstemperatur: 10 - 30 °C * Viskosität ( Bt.): 8 - 200 mPas Fördermenge: 3 m³/h Saugseitiger Druck absolut: >= 1 bara Druckseitiger Druck absolut: 7 bara Differenzdruck Δp: max. 7 bar beim Befüllen *): angenommen/geschätzt von Dudek-Pumpen Betriebsdaten der angebotenen Pumpe Fördermenge: 3 m³/h Nenndrehzahl: 1.450 UpM Nennleistungsbedarf: ca. 1,2 kW Motorleistung gewählt / empfohlen.: 1,5 kW Ausführung + Materialien Gehäuse: EN GJS 400-15 Zahnräder: Stahl C45 Wellen: Stahl 42CrMo4V Wellenlagerung: Gleitlager CuZn40Al2 Wellenabdichtung: Stopfbuchse für Heißöl Saugstutzen: DN 32 PN 16 Druckstutzen: DN 32 PN 16 Drehrichtung: links bzw. nach Wunsch Druckbegrenzungsventil, einstellb.: inklusive für Drehrichtung links oder rechts, jedoch nur einfachwirkend Wellendichtung Type: Stopfbuchspackung für Heißöl Fabrikat: BURGMANN Zolltarifnummer: 84136039 Ursprungsland: Germany
On request
Get a price
For 48714
shaft with gears item 4, 5, 6, 7, 8, 9, 10 in material stainless steel
On request
Get a price
II/a-Sph
DUDEK-GEAR PUMP, type II/a-Sph Application data Fluid ................................................ : thermal oil Application ...................................... : filling and draining pump for thermal oil system Characteristic of fluid ...................... : not corrosiv, not abrasiv, no solids Area of operation ............................ : standard atmospheres Spare pump for serial no. ............... : D/48239 Working temperature (WT) ............. : max. 250 °C Density ( at WT.) ............................. : ~0,85 kg/l * Ambient temperature ...................... : ~10 - 30 °C * Viscosity ( at WT.) .......................... : 8 - 200 mPas Capacity .......................................... : 10 m³/h Suction pressure absolut ................ : >= 1 bar Discharge pressure absolut ............ : 4 – 5 bar Differential pressure Δp .................. : 3 - 4 bar *) ..................................................... : assumption by Dudek-Pumpen Working data of quoted pump Capacity .......................................... : 10 m³/h Nominal speed ................................ : 1.450 rpm Nominal required power ................. : kW Motor power recommended............ : kW Design and material Pump housing ................................. : ductile iron GGG 40 (EN-GJS-400-15) Gears .............................................. : steel C45 Shafts .............................................. : steel 42CrMo4V Bearing bushes ............................... : CuZn40Al2 Inlet / suction flange ........................ : DN 50 PN 16 Outlet / discharge flange ................. : DN 50 PN 16 Direction of turning ......................... : anticlockwise + clockwise Pressure relief valve ....................... one-way pressure relief valve for anticlockwise rotation is standard ........................................................ (clockwise if required). Shaft sealing Type ................................................ : soft packing for hot oil Brand / maker ................................. : BURGMANN Customs tariff number : 84136039 Country of origin : Germany
On request
Get a price
SB16SPH
Pumpe, Type SB 16 ( in Material SPH ) mit regulierbarem Überströmventil
On request
Get a price
51433
Fördergut Schmelzkleber Eigenschaften nicht korrosiv, nicht abrasiv, ohne Feststoffe Besondere Anforderungen Einsatz in - Beheizung notwendig Standard Atmosphäre, kein Ex-Bereich Betriebstemperatur (Bt.) ja, mit Thermalöl, Vorlauftemperatur 220 °C Spez. Gewicht ( Bt.) max. 100 - 170 °C Umgebungstemperatur 1,0 - 1,1 kg/l Viskosität ( Bt.) 0 - 40 °C * Fördermenge 700 – 800 l/h Saugseitiger Druck absolut Zulauf, ggfs. leichter Unterdruck Druckseitiger Druck absolut max. 13 bara Differenzdruck Δp max. 12 bar
On request
Get a price
1/B SPH
Pump Fördergut ........................................ : Thermalöl Eigenschaften ................................. : nicht korrosiv, nicht abrasiv, ohne Feststoffe Verwendung als .............................. : Befüll- und Entleerpumpe für Thermalölsystem Einsatz in ........................................ : kein Ex-Bereich Betriebstemperatur (Bt.) ................. : max. 250 °C Spez. Gewicht ( Bt.) ........................ : 0,9 kg/l * Umgebungstemperatur ................... : 10 - 30 °C * Viskosität ( Bt.)................................ : 2 - 220 mPas * Fördermenge .................................. : ~ 7,2 m³/h Saugseitiger Druck absolut............. : >= 1 bara Druckseitiger Druck absolut............ : 7 bara Differenzdruck Δp ........................... : 6 bar *) ..................................................... : angenommen/geschätzt von Dudek-Pumpen
4560 €
SB 16
Pumpe mit einstellbarem Druckbegrenzungsventil SB, Typ SB-16 Fluid ................................................ :thermal oil Application ...................................... :filling and draining pump for thermal oil system Characteristic of fluid ...................... :not corrosiv, not abrasiv, no solids Area of operation ............................ :standard atmospheres Working temperature (WT) ............. :max. 200 °C Density ( at WT.) ............................. :~0,85 kg/l Ambient temperature ...................... :~10 - 30 °C Viscosity ( at WT.) .......................... :< 75 mPas Capacity .......................................... :0,9 m3/h Suction pressure absolut ................ :>= 1 bar Differential pressure Δp .................. :3 bar Capacity .......................................... :0,9 m3/h Nominal speed ................................ :1.400 rpm Nominal required power ................. :0,29 kW Motor power recommended ............ :0,37 kW Pump housing ................................. :cast iron GG 25 (EN-GJL-250) Gears .............................................. :steel 16MnCr5 Shafts .............................................. :steel 16MnCr5 Bearing bushes ............................... :GG 25 Inlet / suction flange ........................ :G 1⁄2” Outlet / discharge flange ................. :G 1⁄2” Direction of turning ......................... :anticlockwise + clockwise Pressure relief valve .......................one-way pressure relief valve for clockwise rotation Type ................................................ :packing Brand / maker .................................:BURGMANN
On request
Get a price
DIP-100-MD-75
Pump Fluid ................................................ : Glycerin Methanol Characteristic of fluid ...................... : not corrosiv, not abrasiv, no solids Area of operation ............................ : potentially explosive atmospheres (ATEX) Working temperature (WT) ............. : ~ 60 °C Density ( at WT.) ............................. : 1,15 kg/l Ambient temperature ...................... : 0 - 40 °C * Viscosity ( at WT.) .......................... : 40 – 60 mPas Capacity required ........................... : 4,5 m³/h Differential pressure Δp .................. : 3 bar * *) ..................................................... : assumption by Dudek-Pumpen Working data of quoted pump Capacity .......................................... : 5,2 m³/h @ 940 rpm, 6,2 m³/h @ 1.130 rpm with 60 Hz Nominal speed ................................ : 1.130 rpm @ 60 Hz Nominal required power ................. : 1,7 kW Motor power recommended............ : 2,2 kW Design and material Pump housing ................................. : stainless steel S 316 L ( 1.4404 Gears .............................................. : stainless steel, S 316 L 1.4404,nitrated Shafts .............................................. : stainless steel, S 316 L 1.4404,nitrated Bearing bushes ............................... : CuZn40Al2 Inlet / suction flange ........................ : threat borings for existing flange sets DN 40 PN 16 Outlet / discharge flange ................. : threat borings for existing flange sets DN 40 PN 16 Direction of turning ......................... : anticlockwise Shaft sealing Type ................................................ : magnetic coupling (inner rotor + can) Brand / maker ................................. : BURGMANN Description / design ........................ : MAK66-S4 Inner rotor ....................................... : stainless steel Can ................................................. : stainless steel Flange of can .................................. : stainless steel
9493.33 €
101102
DUDEK-Pumpe(n), Type II/a-Sph mit regulierbarem Überströmventil Einsatzdaten vom Kunden Fördergut ........................................: Thermalöl Eigenschaften .................................: nicht korrosiv, nicht abrasiv, ohne Feststoffe Verwendung als ..............................: Befüll- und Entleerpumpe für Thermalölsystem Ersatz/Reserve für ..........................: D/50449 Einsatz in ........................................: kein Ex-Bereich Betriebstemperatur (Bt.) .................: 50 – 200 °C max beim Entleeren. Spez. Gewicht ( Bt.)........................: ~ 0,85 kg/l * Umgebungstemperatur...................: 0 - 40 °C * Viskosität ( Bt.)................................: 8 - 200 mPas Fördermenge ..................................: 10 m³/h Saugseitiger Druck absolut.............: >= 1 bara Differenzdruck Δp ...........................: 4 bar beim Befüllen Differenzdruck Δp Entleeren...........: 3 bar *) .....................................................: angenommen/geschätzt von Dudek-Pumpen Fördermenge ..................................: 10 m³/h Nenndrehzahl .................................: 1.450 UpM Nennleistungsbedarf.......................: kW Motorleistung gewählt / empfohlen.: kW Maximal zulässige Betriebstemp. ...: 250 °C beim Entleeren Ausführung + Materialien Gehäuse .........................................: EN GJS 400 Zahnräder .......................................: Stahl C45 Wellen.............................................: Stahl 42CrMo4V Wellenlagerung...............................: Gleitlager CuZn40Al2 Saugstutzen....................................: DN 50 PN 16 Druckstutzen...................................: DN 50 PN 16 Drehrichtung ...................................: links für den Befüllvorgang (Standard) ........................................................ rechts für den Entleervorgang (nach Wunsch auch umgekehrt) Überström-/Druckbegrenzungsventil .: inklusive. Ventil ist aktiv für Standard Drehrichtung
On request
Get a price
Type III/a
On request
Get a price

The site contains only a small part of the catalog items DUDEK-PUMPEN.

If you have not found the article you need, send a request to the mail [email protected] and we will definitely send you a commercial proposal.

About the manufacturer

Affordable solutions for all your application needs - this single sentence can mark the crucial principle of FAMAGA. We are selling top-class industrial equipment and spare parts made by DUDEK-PUMPEN. We are thankful of our high preference of top quality brands on the industrial market, which means that we can distribute any proportion, any weight and any size of industrial products.

We are a team of experts, who manage over 2000 inquiries daily and always bring relevant solutions for your applications. We provide everything you need for the growth of your industry. Due to our well-shaped logistics bond, we bring your desirable product of DUDEK-PUMPEN in the fastest possible time at fair prices. If you think that your purchasing list is massive, we have the strength to find enough space for it. Hence, we offer supply of any proportion, any density and any size industrial instruments and spare parts created by DUDEK-PUMPEN.

Furthermore, all goods are checked before supply. Thanks to the broad portfolio of DUDEK-PUMPEN we are always ready to fulfill critical needs of our buyers in order to accomplish customer satisfaction. We assure the top-class logistics network of industrial machinery and spare parts of DUDEK-PUMPEN.

You forward an query and we provide a solution.

If you lapse anything in your industry, do not hesitate to get in touch with us to
Invite to the tender
Our Manager will contact you soon.
  • Enter your name
  • Enter your contact phone number.
  • Enter your email address
  • This field can not be empty
  • This field can not be empty

The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent

Send a request

We will contact with you and answer to all your questions

  • Enter your name
  • Enter your contact phone number.
  • Enter your email address
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue Search
Something went wrong.
Something seems to have gone wrong. Try again later.
Close the message
We use cookies. For more information, please refer to our data protection policy.
I understand