EPINUS 2K 72 / 3M COMITRONIC-BTI Safety switch

CODED SAFETY SWITCH WITH 2Kg HOLDING FORCE- SS316L HOUSING - IP68 Field of application : It is a coded magnetic sensor using our ACOTOM2® process that detects the opening of mobile guards giving access to hazardous areas and keeps them magnetically closed. An opening/closing handle mounted on the transmitter is available as an option. The housings are made of 316L stainless steel for use in the food industry without compromise. When the transmitter is presented in front of the receiver, both semiconductor contacts close while the auxiliary contact opens. When the transmitter is no longer present then the safety contacts open and the auxiliary contact sends the supply voltage. For use in machine safety, this product must be connected to the AWAX Safety Relay. Operation (cable outlet) : This product is powered in 24 VDC by the AWAX box in order to comply with the ISO13849-1 standard. When the transmitter and receiver targets are aligned, the lines (red/black) and (orange/grey) are closed. The auxiliary static contact (white) opens. The separation of the two elements causes the opening of the two safety lines and the closing of the auxiliary line, thus signaling the fault to the AWAX mismatch controller. If a PLC is used, connect its input to the white wire. This type of sensor works at the transmitter/receiver contact in order to get the maximum magnetic holding. Technical data : Power supply 20 to 28 VDC Current 40 mA to 24 VDC Line protection with AWAX short-circuit monitoring Auxiliary line PNP NF 250 mA Temperature -25 °C / +80 °C Protection rating IP68 Detection Hysteresis 3mm 2mm Dimensions Transmitter : 90 x 19 x 21 mm Receiver : 90 x 19 x 21mm Weight Transmitter : 170g Receiver : (cable 3m): 270g