R030507096 Bosch Rexroth Compact module

Structure and attachments Motor attachment – direct attachment with i = 1 The motor is attached directly to the compact module’s drive end enclosure via a motor mount. Motor attachment – with gear The planetary gearbox is attached by a mount. The mount serves to fasten the gearbox to the CRK and as a closed housing. Due to the connection without coupling, the drive torque is transferred to the drive shaft of the Compact Module with minimal torsional deflection. Available gear ratios: i = 3 (for CKR-145 and CKR-200), i = 5, i = 10 Structural design 1 Drive end enclosure 2 Frame 3 Belt drive 4 Carriage 5 Non-drive end enclosure Additional components 6 Magnetic sensor 7 Mounting duct 8 Socket/plug 9 Connection plate 10 Flanged type 11 Planetary gearbox 12 Motor Attachments

• Planetary gearbox with various gear ratios

• Maintenance-free servo motors with selectable brake and attached feedback

• Switches (magnetic sensors), switch activation without additional switch flag

• Socket and plug

• Mounting duct made of aluminum for sensors

Design/options for guideway (frame), carriages, connection plates, see section “Dimensions”

1)	Guideway (frame)
2)	Carriages
3)	Connection plates

Lubrication versions Lube version LSS, LPG

• Grease lubrication with manual grease gun via frame, carriage or via connection plate

1)	Connection plates

A Drive side Lube version LCF, LCO

• 2 lube connections

• Prepared for connection to central lubrication systems

A Drive side 1 Lube connection, Runner Block left 2 Lube connection, Runner Block right Notes: LSS:

• Initial lubrication by Bosch Rexroth

• Relubrication using manual grease gun

LPG:

• Ball Rail System and Ball Screw Assembly only with corrosion prevention

• Relubrication using manual grease gun

• Basic lubrication required

LCF:

• Prepared for connection to central lubrication systems for liquid grease (NLGI grade 00 in accordance with DIN 51818)

• • Lubrication with liquid grease only via single-line piston distributor system

• Basic lubrication required

LCO:

• Prepared for connection to central lubrication systems for oil

• Oil lubrication only via single-line piston distributor system

• Runner Block and Ball Screw Assembly nut with integrated non-return valves

• Basic lubrication required