We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727500220
Description
Switching principle | 5/4 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5727500220, connect FAMAGA, the world's prime supplier of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are represented in the quality of merchandises and special attention to each client. We value everyone, who conspired with us - so, our regular clients accept the most convenient purchase terms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such clients, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Grenada, Cameroon, Belize, United States, Sudan, Uruguay, Belarus, Chad, North Korea, Afghanistan, Syria, Laos, Kazakhstan, Israel, Thailand, Mali, Nepal, Ghana, Malaysia, Jamaica, Niger, Central African Republic, Yemen, Malta, Liechtenstein, Armenia, Tunisia, India, Haiti, Bosnia and Herzegovina, Samoa, Kenya, Greece, Iraq, New Zealand, Jordan, Slovakia, Nigeria, Albania, Austria, Bolivia. A well-elaborated logistics system and a partnership network guide us to send our products anywhere in the planet on-time without discrediting product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or send a message to the online chat on our site. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 20 ms |
Typ. switch-off time | 54 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. NOTE:In order to ensure the operating function of the valve, do not fall below the minimum operating pressure of 3 bar ! |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |