We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5796675680
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 850 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5796675680, connect FAMAGA, the world's prime vendor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are outlined in the quality of outputs and special attention to each orderer. We respect everyone, who joined with us - hence, our regular consumers accept the most beneficial purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, United States, Afghanistan, China, Algeria, Romania, Cameroon, Ukraine, Honduras, Djibouti, Albania, Yemen, Myanmar, Dominica, Philippines, Mali, Grenada, Turkmenistan, Mauritania, Austria, Brunei, Bolivia, Netherlands, Cyprus, Guyana, Luxembourg, Vietnam, South Korea, Fiji, Kenya, Poland, Zambia, Seychelles, Kiribati, Morocco, Mexico, Uganda, Botswana, Burkina Faso, Croatia, East Timor, Tajikistan, Serbia, Syria. A well-elaborated logistics network and a partnership network guide us to send our goods anywhere in the globe on-time without compromising product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 850 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |