We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495200
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822495200, get in touch with FAMAGA, the world's main supplier of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of spare parts and personalseparate attention to each client. We understand everyone, who cooperated with us - thus, our regular purchasers receive the most beneficial purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, El Salvador, Mexico, Tajikistan, Mozambique, Cape Verde, Estonia, Sudan, France, Netherlands, Peru, South Korea, Malta, Argentina, Finland, Guyana, Djibouti, Guinea, Indonesia, Russia, South Sudan, Suriname, Slovakia, Dominica, Ghana, Angola, Fiji, United States, The Bahamas, Gambia, Laos, Paraguay, Zimbabwe, Austria, Nepal, Nigeria, Bolivia, Egypt, Tonga, Pakistan, Jordan, East Timor, Philippines, Ireland, Cyprus. A well-built logistics network and a partnership network let us to deliver our elements anywhere in the world promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or book, phone us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |