We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395000
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822395000, call FAMAGA, the world's main distributor of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and individual attention to each purchaser. We praise everyone, who worked with us - so, our regular customers accept the most desirable purchase terms and discounts on the industrial equipment market. Now, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Angola, Afghanistan, Venezuela, Seychelles, Estonia, Luxembourg, Equatorial Guinea, Myanmar, Japan, Albania, Poland, North Korea, Moldova, Samoa, Nicaragua, China, Bhutan, Brunei, El Salvador, Russia, Sweden, Chile, Syria, Montenegro, The Gambia, South Sudan, Ireland, Guyana, Uzbekistan, Zambia, Austria, Tajikistan, Kazakhstan, Morocco, Iceland, Togo, Mauritania, Andorra, Botswana, Antigua and Barbuda, Mauritius, Croatia, Guatemala, Panama. A advanced logistics connection and a partnership network guide us to conduct our products anywhere in the planet immediately without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or make a request, contact us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |