We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5772085302
Description
Actuating control | single solenoid |
Return type | With spring return |
Switching principle | 3/2 |
Version | Spool valve, positive overlapping |
Housing | Die cast zinc,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Qn 1▶2 | 1400 l/min |
Qn 2▶3 | 1400 l/min |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5772085302, contact FAMAGA, the world's primary company of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of outputs and individual attention to each user. We admire everyone, who worked with us - therefore, our regular clients get the most acceptable purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such clients, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Cameroon, Bulgaria, Cambodia, Guinea-Bissau, Kazakhstan, Laos, Zambia, Congo, Tajikistan, Honduras, Turkmenistan, Papua New Guinea, Mali, Paraguay, Panama, Mauritania, Argentina, Belize, Iceland, Netherlands, Iran, Tunisia, Antigua and Barbuda, Sudan, Poland, Algeria, Swaziland, Malta, Jordan, Chile, South Sudan, Botswana, Indonesia, Ecuador, Brunei, Uganda, Finland, Armenia, Rwanda, Vietnam, Brazil, Croatia, Sierra Leone, Denmark, Hungary, Kenya. A well-built logistics bond and a partnership network let us to conduct our products anywhere in the earth promptly without compromising product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | See table |
Medium temperature min./max. | See table |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 1400 l/min |
Nominal flow 1 ▶ 2 | 1400 l/min |
Nominal flow 2 ▶ 3 | 1400 l/min |
Compressed air connection | according to ISO 228-1 |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | 13 14 |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. option valve: The input and output compressed air connections can be exchanged.The valve can thereby be used in the NC or NO operating mode. |
Material |
---|
Housing | Die cast zinc Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |