We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392908
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822392908, make contact with FAMAGA, the world's dominant producer of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each consumer. We appreciate everyone, who worked with us - so, our regular buyers obtain the most desirable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, North Korea, Turkey, Italy, Montenegro, Lithuania, Greece, Myanmar, Portugal, Oman, Azerbaijan, Colombia, Argentina, Kazakhstan, Vietnam, Burkina Faso, Brazil, Laos, Monaco, New Zealand, Malta, Cameroon, Algeria, Seychelles, Sierra Leone, Nepal, Tonga, Tunisia, Israel, El Salvador, United States, Yemen, Burundi, Swaziland, Sudan, Pakistan, Iceland, Czech Republic, Bolivia, Slovakia, Qatar, Jordan, Tanzania, Rwanda, Macedonia. A well-elaborated logistics bond and a partnership network help us to send our goods anywhere in the globe as soon as possible without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |