We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820060896
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 800 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0820060896, get in touch with FAMAGA, the world's dominant provider of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of outcomes and personalseparate attention to each orderer. We praise everyone, who collaborated with us - thus, our regular buyers get the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Libya, Tajikistan, Bosnia and Herzegovina, Mexico, Belize, Mali, Malaysia, Morocco, Oman, Burma, Cyprus, Palestine, Zimbabwe, Guatemala, Equatorial Guinea, Moldova, Suriname, Switzerland, Vietnam, Kazakhstan, Latvia, Kenya, Botswana, Denmark, Mauritania, Uruguay, China, Dominica, Syria, Serbia, Nigeria, Kuwait, Austria, Fiji, Senegal, Argentina, Samoa, Finland, Lithuania, Indonesia, Laos, Cape Verde, Ireland, Mauritius, Mozambique. A well-developed logistics network and a partnership network allow us to deliver our items anywhere in the planet as soon as possible without damaging product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Nominal flow Qn | 800 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |