We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820060251
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 800 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820060251, catch up with FAMAGA, the world's primary provider of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are outlined in the quality of items and special attention to each customer. We praise everyone, who cooperated with us - so, our regular clients get the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Austria, Bahrain, San Marino, Latvia, Jordan, Argentina, Cyprus, Sweden, Romania, Bhutan, United Arab Emirates, Lebanon, Bahamas, Mauritania, Iraq, Niger, Dominica, Togo, Bolivia, Montenegro, Indonesia, Macedonia, United States, Tanzania, Burkina Faso, Uganda, Estonia, East Timor, Mauritius, Albania, Mongolia, Morocco, Ghana, Russia, Thailand, Brazil, Botswana, Pakistan, Mali, Yemen, Lithuania, Luxembourg, Egypt, Haiti, Comoros. A well-elaborated logistics link and a partnership network guide us to dispatch our elements anywhere in the planet on-time without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 800 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2 Nm |
Weight | See table |
Comment | An example configuration is illustrated. The delivered product may thus deviate from the illustration. |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |