We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394004
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822394004, connect FAMAGA, the world's influential provider of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of merchandises and personalseparate attention to each buyer. We admire everyone, who collaborated with us - thus, our regular clients procure the most convenient purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Thailand, Bahamas, Papua New Guinea, Nepal, Andorra, Israel, Djibouti, Zimbabwe, Nicaragua, Uzbekistan, Cape Verde, Chad, Canada, Guinea, Comoros, Singapore, Czech Republic, Tajikistan, Peru, Serbia, New Zealand, Suriname, Laos, South Korea, Armenia, Afghanistan, Monaco, Bosnia and Herzegovina, Pakistan, The Bahamas, Turkmenistan, Ireland, Argentina, Costa Rica, Australia, Bangladesh, Angola, Kyrgyzstan, Belarus, Mauritania, Chile, Dominica, Niger, Botswana, Seychelles, Croatia, Yemen. A well-shaped logistics system and a partnership network let us to deliver our products anywhere in the earth as soon as possible without damaging product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or place an order, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |