We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
1332005000 (ICM-DA-020-0050-M) AVENTICS - Minizylinder, Serie ICM
Part number
1332005000
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1332005000 (ICM-DA-020-0050-M) AVENTICS - Minizylinder, Serie ICM 1332005000, catch up with FAMAGA, the world's the best producer of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and special attention to each client. We esteem everyone, who collaborated with us - hence, our regular buyers receive the most beneficial purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Botswana, Qatar, Bangladesh, The Bahamas, South Sudan, Cuba, Greece, Turkey, Tajikistan, Netherlands, France, Australia, Iceland, Iran, Samoa, Sweden, Dominica, Djibouti, Niger, Cape Verde, Nepal, Suriname, Finland, Seychelles, Albania, Mexico, The Gambia, Mozambique, Paraguay, Cyprus, Vietnam, North Korea, Ireland, Macedonia, Jordan, El Salvador, Peru, Georgia, Malta, Benin, Tonga, Philippines, Estonia, Swaziland, Guatemala. A well-developed logistics bond and a partnership network cheer us to conduct our products anywhere in the globe immediately without discrediting product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this quantity is rising every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To request or book, get in touch with us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |