We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822384006
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822384006, connect FAMAGA, the world's foremost vendor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each purchaser. We value everyone, who conspired with us - therefore, our regular purchasers get the most flexible purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Niger, Norway, Zimbabwe, Ecuador, Antigua and Barbuda, Lebanon, Ireland, Suriname, Papua New Guinea, Turkmenistan, Honduras, Syria, Samoa, Dominica, Moldova, Equatorial Guinea, Algeria, Iceland, South Korea, Laos, Uganda, Sudan, Argentina, Ghana, Namibia, Bulgaria, North Korea, Kazakhstan, Indonesia, Kenya, Kiribati, United Arab Emirates, Hungary, Luxembourg, Croatia, Cameroon, Mali, Tonga, Panama, Slovakia, Vietnam, Denmark, Zambia, Uruguay, Israel. A well-built logistics connection and a partnership network let us to conduct our items anywhere in the planet on-time without disreputing product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, contact us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |