Aventics (brand of Emerson) 0822084206
  Aventics (brand of Emerson) 0822084206

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822084206 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822084206

Description

Piston rod modification through
Functional principle double-acting
Cushioning elastic
Piston diameter 25 mm
Piston rod thread M10x1,25
Standardization ISO 6432
Stroke 125 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822084206

If you are pursuing Aventics (brand of Emerson) 0822084206, contact FAMAGA, the world's leading producer of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and particular attention to each consumer. We respect everyone, who cooperated with us - therefore, our regular clients accept the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world . A well-shaped logistics network and a partnership network guide us to ship our units anywhere in the globe as soon as possible without damaging product quality.

A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.

All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.

To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0822084206

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another!
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane