We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680359
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480680359, catch up with FAMAGA, the world's chief vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each consumer. We value everyone, who joined with us - therefore, our regular purchasers get the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such customers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Spain, Tonga, Netherlands, Mozambique, Sri Lanka, Portugal, Mexico, Nicaragua, Morocco, Gambia, Monaco, Swaziland, Fiji, Burundi, Qatar, United Arab Emirates, Mauritius, Ecuador, Oman, Serbia, Samoa, Russia, Djibouti, United States, Finland, Costa Rica, Haiti, Botswana, Niger, The Gambia, Malaysia, Indonesia, Yemen, Denmark, Burkina Faso, Laos, Norway, Switzerland, Poland, Luxembourg, Lithuania, Kuwait, Brazil, Ireland, Brunei, China, Antigua and Barbuda. A well-developed logistics bond and a partnership network assist us to deliver our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this quantity is growing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |