We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010557
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 40 mm |
Piston rod thread | M6 |
Stroke | 50 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822010557, catch up with FAMAGA, the world's chief retailer of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of outcomes and particular attention to each customer. We cherish everyone, who worked with us - therefore, our regular buyers receive the most acceptable purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4000 such buyers, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Italy, United Arab Emirates, Uzbekistan, Austria, France, Papua New Guinea, Montenegro, Belize, Uganda, Fiji, Liechtenstein, New Zealand, Burundi, Jamaica, Tanzania, Ukraine, Sierra Leone, The Gambia, Saudi Arabia, Lithuania, Argentina, Antigua and Barbuda, Nigeria, Slovakia, Namibia, Bosnia and Herzegovina, Japan, Brazil, Burkina Faso, Malta, Eswatini, Thailand, Australia, Switzerland, Czech Republic, Pakistan, Djibouti, Kiribati, Paraguay, Zambia, Benin, Uruguay, Belarus, Chile, Iran, Iceland, Croatia. A well-developed logistics chains and a partnership network assist us to ship our products anywhere in the earth on-time without compromising product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, get in touch with us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |