We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390608
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822390608, connect FAMAGA, the world's prime supplier of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and private attention to each client. We cherish everyone, who cooperated with us - thus, our regular clients pick up the most flexible purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Portugal, Tanzania, Guyana, Afghanistan, Bahamas, Palestine, Indonesia, El Salvador, Syria, Azerbaijan, Fiji, Suriname, Angola, Cameroon, Vietnam, Togo, Tajikistan, Antigua and Barbuda, Samoa, United States, Georgia, Luxembourg, Mauritania, Benin, Netherlands, Liberia, Guatemala, Israel, Croatia, United Arab Emirates, Kuwait, Morocco, Kenya, Seychelles, Mali, Kiribati, China, Mexico, Finland, Argentina, Sweden, Hungary, Belarus, Nepal, Serbia, North Korea. A well-shaped logistics network and a partnership network let us to dispatch our elements anywhere in the earth promptly without damaging product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or place an order, contact us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |