We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001294
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001294, connect FAMAGA, the world's main vendor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each customer. We value everyone, who joined with us - so, our regular clients procure the most convenient purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Congo, Norway, Nicaragua, Latvia, Papua New Guinea, Belgium, Brunei, Angola, East Timor, Ecuador, South Sudan, Sweden, The Gambia, Malta, Slovenia, Switzerland, Djibouti, Canada, Tunisia, Pakistan, Ireland, Jamaica, Serbia, Belarus, United States, Japan, Gambia, Egypt, Rwanda, Malaysia, Vietnam, Nepal, Suriname, Ukraine, Comoros, Namibia, India, Cape Verde, Afghanistan, Samoa, Moldova, Dominica, Israel, Burkina Faso, Morocco, Peru, Tonga. A well-developed logistics link and a partnership network cheer us to conduct our elements anywhere in the globe on-time without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |