We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392904
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822392904, make contact with FAMAGA, the world's dominant producer of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each consumer. We understand everyone, who worked with us - so, our regular consumers obtain the most flexible purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such purchasers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Honduras, Cape Verde, Jordan, Thailand, Bhutan, Romania, New Zealand, North Korea, Bosnia and Herzegovina, Jamaica, Tunisia, Algeria, Tonga, United Arab Emirates, Grenada, Armenia, Mongolia, Chad, Cyprus, Niger, Israel, Denmark, Mali, Libya, Hungary, Azerbaijan, Russia, Kyrgyzstan, Afghanistan, Norway, India, Bangladesh, Equatorial Guinea, Luxembourg, Bulgaria, Mauritania, Albania, Zambia, Turkey, Brazil, Burkina Faso, Iraq, Mexico, Paraguay, Sudan, Namibia, Switzerland. A well-built logistics bond and a partnership network help us to dispatch our goods anywhere in the globe promptly without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or book, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |