We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007001
Description
| Parts | Filter |
| Condensate drain | fully automatic, open without pressure |
| filter porosity | 5 µm |
| Housing | Polyamide |
| Reservoir | Polycarbonate |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 3500 l/min |
| Compressed air connection | G 3/8 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R412007001, reach FAMAGA, the world's principle provider of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and particular attention to each buyer. We admire everyone, who joined with us - therefore, our regular clients receive the most attractive purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Côte d\'Ivoire, Antigua and Barbuda, Eswatini, Turkmenistan, Gambia, Indonesia, Uzbekistan, Serbia, Rwanda, Belize, Grenada, Laos, Azerbaijan, Luxembourg, Bosnia and Herzegovina, Malawi, Bolivia, Central African Republic, Zimbabwe, Ghana, Ireland, Uruguay, Uganda, Switzerland, Chile, Togo, Mongolia, New Zealand, Paraguay, Morocco, Nigeria, Tonga, South Korea, Kenya, Malta. A well-shaped logistics system and a partnership network help us to ship our units anywhere in the earth on-time without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Version | Standard filter, Can be assembled into blocks |
| Parts | Filter |
| Mounting orientation | vertical |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 1,5 ... 16 bar |
| Ambient temperature min./max. | -10 ... 50 °C |
| Medium temperature min./max. | -10 ... 50 °C |
| Medium | Compressed air Neutral gases |
| Filter reservoir volume | 49 cm³ |
| Filter element | exchangeable |
| filter porosity | 5 µm |
| Condensate drain | See table |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
| Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
| Material |
|---|
| Housing | Polyamide |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Threaded bushing | Die cast zinc |
| Reservoir | Polycarbonate Die cast zinc |
| Protective guard | Polyamide |
| Filter insert | Polyethylene |
