We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391905
Description
| Piston rod modification | non-rotating,Optionally through (hollow) |
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 20 mm |
| Piston rod thread | M6 |
| Standardization | NFE 49004 |
| Stroke | 30 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | M5 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 0822391905, catch up with FAMAGA, the world's chief distributor of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each customer. We value everyone, who liased with us - hence, our regular purchasers bring in the most favorable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Guinea-Bissau, Philippines, Switzerland, South Sudan, Nicaragua, Turkey, Fiji, Cuba, Zambia, Seychelles, Lebanon, The Gambia, Netherlands, Samoa, El Salvador, Laos, Eritrea, Kiribati, East Timor, Japan, Brunei, Slovakia, Syria, Mauritius, Macedonia, South Korea, India, Finland, Dominica, Latvia, Central African Republic, Peru, Panama, Czech Republic, Djibouti, Qatar. A well-built logistics link and a partnership network cheer us to ship our items anywhere in the world with no delay without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or order, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | NFE 49004 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Use our Internet configurator to order variants with an external thread. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Polyurethane |
