We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5654420000
Description
Number of valve positions | 1 |
Subbase | Die-cast aluminum |
Compressed air connection input | G 1/2 |
Compressed air connection output | G 1/2 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5654420000, make contact with FAMAGA, the world's the best provider of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of products and personalseparate attention to each consumer. We respect everyone, who worked with us - thus, our regular customers get the most attractive purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such customers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bahamas, Panama, Cape Verde, Georgia, Angola, Uruguay, The Gambia, Honduras, Argentina, Madagascar, Malawi, Malaysia, Nicaragua, Ireland, Philippines, Namibia, Guyana, Mongolia, Tajikistan, Fiji, Morocco, Kyrgyzstan, Zimbabwe, Turkmenistan, Iceland, Mexico, Laos, United States, Haiti, Swaziland, Algeria, Botswana, Togo, Ghana, Serbia, Switzerland. A well-developed logistics bond and a partnership network allow us to send our units anywhere in the world on-time without discrediting product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as stay in control.
To consult or place an order, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -20 ... 120 °C |
Medium temperature min./max. | -20 ... 120 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Direction of pneumatic port (1) | On the side |
Direction of pneumatic port (3,5) | On the side |
Direction of pneumatic port (2,4) | On the side |
Direction of pneumatic port (12) | On the side |
Direction of pneumatic port (14) | On the side |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Surface | painted |
Base plate | Die-cast aluminum, black painted |