We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000928
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 100 mm |
| Stroke | 25 mm |
| Housing | Aluminum |
| Sealing material | Polyurethane |
| Compressed air connection | G 3/8 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R402000928, contact FAMAGA, the world's leading supplier of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each client. We respect everyone, who worked with us - thus, our regular clients pick up the most flexible purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Togo, Albania, Guinea-Bissau, Qatar, Croatia, Equatorial Guinea, Malaysia, Eritrea, Chile, Kuwait, Canada, Uzbekistan, Vietnam, Burkina Faso, Panama, Slovakia, Saudi Arabia, El Salvador, Gambia, Mali, Guyana, The Gambia, East Timor, Kazakhstan, South Sudan, Greece, Brunei, Namibia, Belarus, Burundi, Sweden, Angola, Egypt, Luxembourg, Thailand, Pakistan, Cape Verde. A well-shaped logistics network and a partnership network allow us to ship our products anywhere in the globe promptly without damaging product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Working pressure min./max. | See table |
| Ambient temperature min./max. | -10 ... 70 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
| Material |
|---|
| Housing | Aluminum, anodized |
| Seal | Polyurethane |
| Front plate | Steel, galvanized |
| Guide rod | Stainless steel |
| Bearing | Sintered bronze |
| Piston rod | Stainless steel |
