We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480193201
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480193201, communicate with FAMAGA, the world's key vendor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each buyer. We appreciate everyone, who joined with us - hence, our regular customers get the most flexible purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Israel, Ghana, Argentina, Mali, Namibia, Dominica, Saudi Arabia, Guinea, Singapore, Liberia, North Korea, Togo, Azerbaijan, Slovakia, Bangladesh, Brazil, Sweden, United Arab Emirates, Iceland, El Salvador, Bolivia, Yemen, Macedonia, Laos, Liechtenstein, Malaysia, Uzbekistan, Armenia, Brunei, Jordan, Swaziland, Uganda, Serbia, Eswatini, Mongolia, Uruguay, Paraguay, Andorra, Senegal, Czech Republic. A well-built logistics chains and a partnership network let us to dispatch our elements anywhere in the earth promptly without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or order, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |