We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011191
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 1x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412011191, reach FAMAGA, the world's chief distributor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are portrayed in the quality of goods and private attention to each user. We admire everyone, who liased with us - hence, our regular buyers accept the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Rwanda, Montenegro, Moldova, Namibia, Argentina, Syria, Chad, Bhutan, Romania, Gambia, Tonga, Djibouti, Ecuador, Chile, Sudan, Niger, Dominica, Vietnam, Mongolia, Angola, Togo, Swaziland, Kiribati, Zambia, Azerbaijan, Qatar, Turkmenistan, Nigeria, Yemen, Antigua and Barbuda, Kuwait, Bangladesh, Peru, Tanzania, Laos, Central African Republic, Austria, Denmark, Turkey, Libya. A well-elaborated logistics system and a partnership network guide us to ship our elements anywhere in the earth quickly without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To get some advice or make a request, contact us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |