We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822493300
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822493300, call FAMAGA, the world's central company of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of items and particular attention to each orderer. We respect everyone, who engaged with us - therefore, our regular purchasers receive the most attractive purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Austria, Iran, Hungary, Slovakia, Chile, Zimbabwe, Liechtenstein, Liberia, The Bahamas, Ecuador, Norway, Serbia, Tunisia, Czech Republic, Bosnia and Herzegovina, Rwanda, Haiti, China, Mali, Croatia, Luxembourg, Sweden, Mongolia, Argentina, Antigua and Barbuda, Switzerland, Burundi, Lithuania, Suriname, Tonga, Dominica, Sierra Leone, Botswana, Kiribati, Namibia, Algeria, Senegal, Ukraine, Uruguay, Montenegro. A well-built logistics link and a partnership network assist us to ship our elements anywhere in the globe promptly without disreputing product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |