We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000916
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R402000916, get in touch with FAMAGA, the world's principle supplier of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each client. We praise everyone, who worked with us - thus, our regular clients accept the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bulgaria, Mozambique, Australia, Denmark, Iran, Azerbaijan, Luxembourg, Monaco, Samoa, Palestine, Yemen, Croatia, China, Estonia, Montenegro, Andorra, Tunisia, United States, Zambia, Haiti, Netherlands, Belarus, Madagascar, Hungary, Benin, Armenia, Tajikistan, El Salvador, Burkina Faso, Egypt, East Timor, Mexico, Morocco, Serbia, Bolivia, Argentina, Angola, Uganda, Georgia, Moldova, United Arab Emirates, Malaysia. A well-shaped logistics network and a partnership network allow us to dispatch our elements anywhere in the globe on-time without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or book, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |