We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001534
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001534, connect FAMAGA, the world's central producer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each buyer. We admire everyone, who worked with us - so, our regular consumers pick up the most convenient purchase forms and discounts on the industrial equipment market. Today, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, South Africa, Zambia, Bhutan, Paraguay, New Zealand, Malta, Guatemala, Slovakia, El Salvador, Georgia, Madagascar, Costa Rica, Philippines, Ukraine, Nicaragua, Vietnam, South Sudan, Botswana, Samoa, Japan, Belize, Brunei, Iraq, Mauritius, Equatorial Guinea, Syria, Ghana, Djibouti, China, Indonesia, Belarus, Swaziland, Peru, Estonia, Kyrgyzstan, Bolivia, Panama, Finland, Uganda, Comoros. A well-shaped logistics chains and a partnership network assist us to deliver our products anywhere in the globe promptly without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |