We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226635300
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 130 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226635300, reach FAMAGA, the world's chief vendor of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of outcomes and special attention to each customer. We admire everyone, who engaged with us - thus, our regular customers obtain the most beneficial purchase terms and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Belgium, Niger, Thailand, Iraq, Kenya, Seychelles, Paraguay, Papua New Guinea, Qatar, United Arab Emirates, Suriname, Singapore, Switzerland, Laos, Jamaica, Luxembourg, Croatia, Burkina Faso, Mauritania, El Salvador, Tonga, Dominica, Fiji, Turkmenistan, New Zealand, Finland, Samoa, Sweden, Afghanistan, East Timor, Ireland, Botswana, Bulgaria, Peru, Cape Verde, Egypt, The Gambia, Swaziland. A well-elaborated logistics network and a partnership network guide us to deliver our goods anywhere in the planet with no delay without damaging product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is rising every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To request or make a request, phone us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |